# DON'T DECAY THE LEARNING RATE , INCREASE THE BATCH SIZE

## 0. PAPER DETAILS

Title: DON’T DECAY THE LEARNING RATE, INCREASE THE BATCH SIZE Authors: Samuel L. Smith, Pieter-Jan Kindermans, and Chris Ying & Quoc V. Le Conference: ICLR 2018 URL: https://arxiv.org/pdf/1711.00489.pdf Summarized by: Afify, Ahmed [ID: 20700841]

## 1. INTRODUCTION

The paper starts by evaluating the performance of Stochastic gradient descent (SGD). It mentions that it is a slow optimizer as it takes a lot of steps to find the minima. However, it generalizes well (Zhang et al., 2016; Wilson et al., 2017). According to (Goyal et al., 2017; Hoffer et al., 2017; You et al., 2017a), this has motivated researchers to try to speed up this optimization process by taking bigger steps, and hence reduce the number of parameter updates in training a model by using large batch training, which can be divided across many machines.

However, according to (Keskar et al., 2016; Goyal et al., 2017), increasing the batch size leads to decreasing the test set accuracy. Smith and Le (2017) believed that SGD has a scale of random fluctuations g = \epsilon (\frac{N}{B}-1), where \epsilon is the learning rate, N number of training samples, and B batch size. They concluded that there is an optimal batch size proportional to the learning rate when B \ll N, and optimum fluctuation scale g for a maximum test set accuracy.

In this paper, the authors main goal is to provide evidence that increasing the batch size is quantitatively equivalent to decreasing the learning rate with the same number of training epochs in decreasing the scale of random fluctuations, but with remarkably less number of parameter updates. Moreover, an additional reduction in the number of parameter updates can be attained by increasing the learning rate and scaling B \propto \epsilon or even more reduction by increasing the momentum coefficient and scaling B \propto \frac{1}{1-m} although the later decreases the test accuracy. This has been demonstrated by several experiments on the ImageNet and CIFAR-10 datasets using ResNet-50 and Inception-ResNet-V2 architectures respectively.

## 2. STOCHASTIC GRADIENT DESCENT AND CONVEX OPTIMIZATION

As mentioned in the previous section, the drawback of SGD when compared to full-batch training is the noise that it introduces that hinders optimization. According to (Robbins & Monro, 1951), there are two equations that govern how to reach the minimum of a convex function:

\sum_{i=1}^{\infty} \epsilon_i = \infty. This equation guarantees that we will reach the minimum

\sum_{i=1}^{\infty} \epsilon^2_i < \infty. This equation, which is valid only for a fixed batch size, guarantees that learning rate decays fast enough allowing us to reach the minimum rather than bouncing due to noise.

To change the batch size, Smith and Le (2017) proposed to interpret SGD as integrating this stochastic differential equation \frac{dw}{dt} = -\frac{dC}{dw} + \eta(t), where C represents cost function, w represents the parameters, and η represents the Gaussian random noise. Furthermore, they proved that noise scale g controls the random fluctuations by this formula: g = \epsilon (\frac{N}{B}-1). As we usually have B \ll N, we can define g \approx \epsilon \frac{N}{B}. This explains why when the learning rate decreases, g decreases. In addition, increasing the batch size, has the same effect and makes g decays. In this work, the batch size is increased until B \approx \frac{N}{10}, then the conventional way of decaying the learning rate is followed.

## 3. SIMULATED ANNEALING AND THE GENERALIZATION GAP

Simulated Annealing: Introducing random noise or fluctuations whose scale falls during training. Generalization Gap: Small batch data generalizes better to the test set than large batch data.

Smith and Le (2017) found that there is an optimal batch size which corresponds to optimal noise scale g (g \approx \epsilon \frac{N}{B}) and concluded that B_{opt} \propto \epsilon N that corresponds to maximum test set accuracy. This means that gradient noise is helpful as it makes SGD escape sharp minima, which does not generalize well.

Simulated Annealing is a famous technique in non-convex optimization. Starting with noise in the training process helps us to discover a wide range of parameters then once we are near the optimum value, noise is reduced to fine tune our final parameters. For instance, in physical sciences, decaying the temperature in discrete steps can make the system stuck in a local minimum while slowly annealing (or decaying) the temperature (which is the noise scale in this situation) helps to converge to the global minimum.

## 4. THE EFFECTIVE LEARNING RATE AND THE ACCUMULATION VARIABLE

The Effective Learning Rate \epsilon_eff: \frac{\epsilon}{1-m}

Smith and Le (2017) included momentum to the equation of the vanilla SGD noise scale that was defined above to be: g = \frac{\epsilon}{1-m}(\frac{N}{B}-1)\approx \frac{\epsilon N}{B(1-m)}, which is the same as the previous equation when m goes to 0. They found that increasing the learning rate and momentum coefficient and scaling B \propto \frac{\epsilon }{1-m} reduces the number of parameter updates, but the test accuracy decreases when the momentum coefficient is increased.

To understand the reasons behind this, we need to analyze momentum update equations below: \Delta A = -(1-m)A + \frac{d\widehat{C}}{dw} \Delta w = -A\epsilon We can see that the Accumulation variable A, which is initially set to 0, then increases exponentially to reach its steady state value during \frac{B}{N(1-m)} training epochs while \Delta w is suppressed. Moreover, at high momentum, we have three challenges: 1- Additional epochs are needed to catch up with the accumulation. 2- Accumulation needs more time \frac{B}{N(1-m)} to forget old gradients. 3- After this time, however, accumulation cannot adapt to changes in the loss landscape.

## 5. EXPERIMENTS

1. SIMULATED ANNEALING IN A WIDE RESNET Dataset: CIFAR-10 (50,000 training images) Network Architecture: “16-4” wide ResNet Training Schedules used as in the below figure: - Decaying learning rate: learning rate decays by a factor of 5 at a sequence of “steps”, and the batch size is constant - Increasing batch size: learning rate is constant, and the batch size is increased by a factor of 5 at every step. - Hybrid: Step 1: learning rate is constant and batch size is increased by a factor of 5. Step 2: learning rate decays by a factor of 5 at each subsequent step, and the batch size is constant. This is the schedule that will be used if there is a hardware limit affecting a maximum batch size limit.

As shown in the below figure: in the left figure (2a), we can observe that for the training set, the three learning curves are exactly the same while in figure 2b, increasing the batch size has a huge advantage of reducing the number of parameter updates. This concludes that noise scale is the one that needs to be decayed and not the learning rate itself

To make sure that these results are the same for the test set as well, in figure 3, we can see that the three learning curves are exactly the same for SGD with momentum, and Nesterov momentum

To check for other optimizers as well. the below figure shows the same experiment as in figure 3, which is the three learning curves for test set, but for vanilla SGD and Adam, and showing

Conclusion: Decreasing the learning rate and increasing the batch size during training are equivalent

2. INCREASING THE EFFECTIVE LEARNING RATE Dataset: CIFAR-10 (50,000 training images) Network Architecture: “16-4” wide ResNet Optimization Algorithm: SGD with momentum Maximum batch size = 5120 Training Schedules: Four training schedules, all of which decay the noise scale by a factor of five in a series of three steps with the same number of epochs. Original training schedule: initial learning rate of 0.1 which decays by a factor of 5 at each step, a momentum coefficient of 0.9, and a batch size of 128. Increasing batch size: learning rate of 0.1, momentum coefficient of 0.9, initial batch size of 128 that increases by a factor of 5 at each step. Increased initial learning rate: initial learning rate of 0.5, initial batch size of 640 that increase during training. Increased momentum coefficient: increased initial learning rate of 0.5, initial batch size of 3200 that increase during training, and an increased momentum coefficient of 0.98. The results of all training schedules, which are presented in the below figure, are documented in the following table:

Conclusion: Increasing the effective learning rate and scaling the batch size results in further reduction in the number of parameter updates

3. TRAINING IMAGENET IN 2500 PARAMETER UPDATES Dataset Description: ImageNet (1.28 million training images) The paper modified the setup of Goyal et al. (2017), and used the following configuration: Network Architecture: Inception-ResNet-V2 Experiment 5.3.1 Goal: Control Batch Size Experiments Parameters: 90 epochs, Noise decayed at epoch 30, 60, and 80 by a factor of 10, Initial ghost batch size = 32, Learning rate = 3, momentum coefficient = 0.9, Initial batch size = 8192 Two training schedules were used: “Decaying learning rate”, where batch size is fixed and the learning rate is decayed “Increasing batch size”, where batch size is increased to 81920 then the learning rate is decayed at two steps.

Conclusion: Increasing the batch size resulted in reducing the number of parameter updates from 14,000 to 6,000.

Experiment 5.3.2 Goal: Control Batch Size and Momentum Coefficient Experiment Parameters: ghost batch size = 64, Noise decayed at epoch 30, 60, and 80 by a factor of 10. The below table shows the number of parameter updates and accuracy for different set of training parameters:

Conclusion: Increasing the momentum reduces the number of parameter updates, but leads to a drop in the test accuracy.

4. TRAINING IMAGENET IN 30 MINUTES Dataset: Same as in the previous experiment Network Architecture: ResNet-50 The paper replicated the setup of Goyal et al. (2017) while modifying the number of TPU devices, batch size, learning rate, and then calculating the time to complete 90 epochs, and measuring the accuracy, and performed the following experiments below:

Conclusion: Model training times can be reduced by increasing the batch size during training.

## 6. RELATED WORK

Major related work mentioned in the paper is as follows: 1- Smith & Le (2017) interpreted Stochastic gradient descent as stochastic differential equation, which the paper built on this idea to include decaying learning rate. 2- Mandt et al. (2017) analyzed how SGD perform in Bayesian posterior sampling. 3- Keskar et al. (2016) focused on the analysis of noise once the training is started. 4- Moreover, the proportional relationship between batch size and learning rate was first discovered by Goyal et al. (2017) and successfully trained ResNet-50 on ImageNet in one hour after discovering the proportionality relationship between batch size and learning rate. 5- Furthermore, You et al. (2017a) presented Layer-wise Adaptive Rate Scaling (LARS), which is appling different learning rates to train ImageNet in 14 minutes and 74.9% accuracy. 6- Finally, another strategy called Asynchronous-SGD that allowed (Recht et al., 2011; Dean et al., 2012) to use multiple GPUs even with small batch sizes.

## 7. CONCLUSIONS

Increasing batch size during training has the same benefits of decaying the learning rate in addition to reducing the number of parameter updates, which corresponds to faster training time. Experiments were performed on different image datasets and various optimizers with different training schedules to prove this result. The paper proposed to increase increase the learning rate and momentum parameter m, while scaling B \propto \frac{\epsilon}{1-m}, which achieves fewer parameter updates, but slightly less test set accuracy as mentioned in details in the experiments’ section. In summary, on ImageNet dataset, Inception-ResNet-V2 achieved 77% validation accuracy in under 2500 parameter updates, and ResNet-50 achieved 76.1% validation set accuracy on TPU in less than 30 minutes. One of the great findings of this paper is that literature parameters were used, and no hyper parameter tuning was needed.

## 8. CRITIQUE

Pros: - The paper showed empirically that increasing batch size and decaying learning rate are equivalent. - Several experiments were performed on different optimizers such as SGD and Adam. - Had several comparisons with previous experimental setups.

Cons: - All Datasets used are image datasets. Other experiments should have been done on datasets from different domains to ensure generalization. - Number of parameter updates was used as a comparison criterion, but wall-clock times could have provided additional measurable judgement although they depend on the hardware used. - Special hardware is needed for large batch training, which is not always feasible. - In section 5.2 (Increasing the Effective Learning rate), the authors did not test a range of learning rate values and used only (0.1 and 0.5).

## 9. REFERENCES

Takuya Akiba, Shuji Suzuki, and Keisuke Fukuda. Extremely large minibatch sgd: Training resnet-50 on imagenet in 15 minutes. arXiv preprint arXiv:1711.04325, 2017.

Lukas Balles, Javier Romero, and Philipp Hennig. Coupling adaptive batch sizes with learning rates.

  arXiv preprint arXiv:1612.05086, 2016.


L´eon Bottou, Frank E Curtis, and Jorge Nocedal. Optimization methods for large-scale machine

  learning. arXiv preprint arXiv:1606.04838, 2016.


Richard H Byrd, Gillian M Chin, Jorge Nocedal, and Yuchen Wu. Sample size selection in

  optimization methods for machine learning. Mathematical programming, 134(1):127–155, 2012.


Pratik Chaudhari, Anna Choromanska, Stefano Soatto, and Yann LeCun. Entropy-SGD: Biasing

  gradient descent into wide valleys. arXiv preprint arXiv:1611.01838, 2016.


Soham De, Abhay Yadav, David Jacobs, and Tom Goldstein. Automated inference with adaptive

  batches. In Artificial Intelligence and Statistics, pp. 1504–1513, 2017.


Jeffrey Dean, Greg Corrado, Rajat Monga, Kai Chen, Matthieu Devin, Mark Mao, Andrew Senior,

  Paul Tucker, Ke Yang, Quoc V Le, et al. Large scale distributed deep networks. In Advances in
neural information processing systems, pp. 1223–1231, 2012.


Michael P Friedlander and Mark Schmidt. Hybrid deterministic-stochastic methods for data fitting.

  SIAM Journal on Scientific Computing, 34(3):A1380–A1405, 2012.


Priya Goyal, Piotr Doll´ar, Ross Girshick, Pieter Noordhuis, Lukasz Wesolowski, Aapo Kyrola, Andrew

  Tulloch, Yangqing Jia, and Kaiming He. Accurate, large minibatch SGD: Training imagenet
in 1 hour. arXiv preprint arXiv:1706.02677, 2017.


Sepp Hochreiter and J¨urgen Schmidhuber. Flat minima. Neural Computation, 9(1):1–42, 1997.

Elad Hoffer, Itay Hubara, and Daniel Soudry. Train longer, generalize better: closing the

  generalization gap in large batch training of neural networks. arXiv preprint arXiv:1705.08741, 2017.


Norman P Jouppi, Cliff Young, Nishant Patil, David Patterson, Gaurav Agrawal, Raminder Bajwa,

  Sarah Bates, Suresh Bhatia, Nan Boden, Al Borchers, et al. In-datacenter performance analysis
of a tensor processing unit. In Proceedings of the 44th Annual International Symposium on
Computer Architecture, pp. 1–12. ACM, 2017.


Nitish Shirish Keskar, Dheevatsa Mudigere, Jorge Nocedal, Mikhail Smelyanskiy, and Ping Tak Peter

  Tang. On large-batch training for deep learning: Generalization gap and sharp minima. arXiv
preprint arXiv:1609.04836, 2016.


Diederik Kingma and Jimmy Ba. Adam: A method for stochastic optimization. arXiv preprint

  arXiv:1412.6980, 2014.


Alex Krizhevsky. One weird trick for parallelizing convolutional neural networks. arXiv preprint

  arXiv:1404.5997, 2014.


Qianxiao Li, Cheng Tai, and E Weinan. Stochastic modified equations and adaptive stochastic

  gradient algorithms. arXiv preprint arXiv:1511.06251, 2017.


Ilya Loshchilov and Frank Hutter. SGDR: stochastic gradient descent with restarts. arXiv preprint

  arXiv:1608.03983, 2016.


Stephan Mandt, Matthew D Hoffman, and DavidMBlei. Stochastic gradient descent as approximate

  bayesian inference. arXiv preprint arXiv:1704.04289, 2017.


James Martens and Roger Grosse. Optimizing neural networks with kronecker-factored approximate

  curvature. In International Conference on Machine Learning, pp. 2408–2417, 2015.


Yurii Nesterov. A method of solving a convex programming problem with convergence rate o (1/k2).

  In Soviet Mathematics Doklady, volume 27, pp. 372–376, 1983.


Lutz Prechelt. Early stopping-but when? Neural Networks: Tricks of the trade, pp. 553–553, 1998.

Benjamin Recht, Christopher Re, Stephen Wright, and Feng Niu. Hogwild: A lock-free approach to

  parallelizing stochastic gradient descent. In Advances in neural information processing systems,
pp. 693–701, 2011.


Herbert Robbins and Sutton Monro. A stochastic approximation method. The annals of mathematical

  statistics, pp. 400–407, 1951.


Samuel L. Smith and Quoc V. Le. A bayesian perspective on generalization and stochastic gradient

  descent. arXiv preprint arXiv:1710.06451, 2017.


Christian Szegedy, Sergey Ioffe, Vincent Vanhoucke, and Alexander A Alemi. Inception-v4,

  Inception-ResNet and the impact of residual connections on learning. In AAAI, pp. 4278–4284,
2017.


Max Welling and Yee W Teh. Bayesian learning via stochastic gradient langevin dynamics. In

  Proceedings of the 28th International Conference on Machine Learning (ICML-11), pp. 681–688,
2011.


Ashia C Wilson, Rebecca Roelofs, Mitchell Stern, Nathan Srebro, and Benjamin Recht.

  The marginal value of adaptive gradient methods in machine learning. arXiv preprint
arXiv:1705.08292, 2017.


Yang You, Igor Gitman, and Boris Ginsburg. Scaling SGD batch size to 32k for imagenet training.

  arXiv preprint arXiv:1708.03888, 2017a.


Yang You, Zhao Zhang, C Hsieh, James Demmel, and Kurt Keutzer. Imagenet training in minutes.

  CoRR, abs/1709.05011, 2017b.


Sergey Zagoruyko and Nikos Komodakis. Wide residual networks. arXiv preprint arXiv:1605.07146,

  2016.


Chiyuan Zhang, Samy Bengio, Moritz Hardt, Benjamin Recht, and Oriol Vinyals. Understanding deep

  learning requires rethinking generalization. arXiv preprint arXiv:1611.03530, 2016.