==Project 1 : Title == Classification of Disease Status
- 1 By: Lai,ChunWei and Greg Pitt
- 2 Proposal 2: The Golden Retrieber
- 3 Project 3 : Classifying Melanoma Images
- 4 Project 4 : classifying trademarks
- 5 Project 5 : Distributed Classification and Data Fusion in Wireless Sensor Networks
- 6 Project 6 : Skin Classification
- 7 Project 7 : System Combination for Multi-Class Classification
- 8 Project 8 : Reproducing the Results of a 1985 Paper
- 9 Project 9 : Domain adaptation
- 10 Project 10 : Classification of 3-dimensional objects
By: Lai,ChunWei and Greg Pitt
For our classification project, we are proposing an application in the medical diagnosis field: For each patient or lab animal, there will be results from a large number of genetic and/or chemical tests. We should be able to predict the disease state of the patient/animal, based on the presence or absence of certain biomarkers and/or chemical markers.
Our project work will include the reduction of dimensionality, and the development or one or more classification functions, with the objectives of minimizing the error rate and also reducing the number of markers required in order to make good predictions. Our results could be used at the patient level, to help make accurate diagnoses, and at the population health level, to make epidemiological surveys of the prevalence of certain medical conditions. In both cases, the results should enable the healthcare system to make better decisions regarding the deployment of scarce healthcare resources.
Our methodology will be chosen soon, after we have seen a few more examples in class. If time permits, we will also attempt a novel classification procedure of our own design.
Currently we have access to a dataset from the SSC data mining section, and we hope to be able to get access to some similar, but larger, datasets before the end of the term.
The software tools that we use will probably include Matlab, Python, and R.
We would like to obtain publishable results if possible, but this is not a primary objective.
Proposal 2: The Golden Retrieber
By Cameron Davidson-Pilon and Jenn Smith
Our goal of this project is to determine statistical results from the population of Twitter users that have a specific celebrity in their display picture. Our algorithm will scan through Twitter's display pictures, and attempt to determine whether a display picture features Canada's most famous icon: Justin Beiber. We will hope that most images contain his trademark swoosh hairstyle, as much of or classification will rely on such handsome features.
After we determine, with some probability of error, that a user has a Beiber Display Pics (BDP), we can then do a statistical analysis on the sample population's tweets, hashtags etc.
Applications of this algorithm include be the Twitter behaviour of Bieber fans. It can be used in an app for companies that want to target such demographics.
We will be using Matlab and Python.
Project 3 : Classifying Melanoma Images
By: Robert Amelard
The current diagnosis of melanoma is a very subjective method. Some popular methods for diagnosing are the 7-point checklist and the ABCD rubric. They are both based on very subjective criteria, such as the "irregularity" of a skin lesion. My project will attempt to classify an input image containing a skin lesion into the class "benign" or "malignant" based on features that are regarded as high risk in these rubrics. This will help doctors come to more justified diagnoses of patients.
Project 4 : classifying trademarks
By: Chen Wang; YuanHong Yu; Jia Zhou
Our group decided to use statistical classification methods to distinguish various types of trademarks within an industry, and thus attempt to determine which is the most popular color that is being used by manufactures globally. We would like to scan the selected trademarks first, after obtaining all the desired trademarks, we then can do further statistical analysis. Our major goals are to help customers easily distinguish the specific industry by just looking at the color the trademark and also help new entrants who want to enter the market have a better knowledge of their competitors. The possible software and tools we would like to use include: R, Matlab.
Project 5 : Distributed Classification and Data Fusion in Wireless Sensor Networks
By : Mahmoud Faraj
Wireless sensor networks (WSNs) are a recently emerging technology consisting of a large number of battery powered sensor nodes interconnected wirelessly and capable of monitoring environments, tracking targets, and performing many other critical applications. The design and deployment of such type of network are challenging tasks due to the imperfect nature of the communicated nodes (i.e., sensors) in the WSNs. The dramatic depletion of the sensor’s energy while performing the regular tasks (e.g. sensing, processing, receiving and transmitting information) constitutes a major threat of shortening the lifetime of the network. That is due to the limited amount of energy in the sensor which is constrained by the dimensions of these sensors. The lack of energy makes the lifetime of the network shorter. Also, the death of some nodes causes partitioning the network. As a result, some nodes become not able to communicate with others to accomplish the ultimate goal of the remotely deployed network.
In our research work, we propose one of the techniques learned in the course to be used for performing distributed classification of a moving target (e.g. vehicle, animal, or person). Each sensor node will be able to classify the moving target and then track it in the WSN field. In order to conserve power and extend the lifetime of the network, we also propose distributed (in-network) data fusion by using Distributed Kalman Filter where the data are fused in the network instead of having all the data transmitted to the fusion center (sink). Each node processes the data from its own set of sensor, communicating with neighbouring nodes to improve the classification and location estimates of the moving target. Simulation results will be provided to demonstrate the significant advantages of using distributed classification and data fusion and also to show the improvement of the WSN as a whole.
Project 6 : Skin Classification
By : Jeffrey Glaister
My goal for this project is to classify segments of an oversegmented image as skin or skin lesion (a two-class problem). The overall goal and application is to automatically segment the skin lesion in pictures of patients at risk of melanoma, unsupervised. A standard segmentation algorithm will be applied to the image to oversegment it. Then, the resulting segments will have classified as normal skin or not normal skin and be merged. Of particular interest is texture and colour classification, since skin and lesions differ slightly in texture and colour. Other possible features include spatial location and initial segment size. Time permitting, novel texture and colour classifiers will be investigated.
I have access to skin lesion images from a public database, some of which have been manually contoured to test the algorithm.
I will be using Matlab.
Project 7 : System Combination for Multi-Class Classification
By : Samson Hu, Blair Rose, Mikhail Targonski
Our goal is to combine SVM with other classification methods. We hope to optimize performance and increase the diversity in resulting ensemble. We will use this method for voice recognition as seen in Ferror 09 in JMLR.
The possible software and tools include but not limited to: Matlab, R.
Project 8 : Reproducing the Results of a 1985 Paper
By : Mohamed El Massad
For the CM 763 final project, I intend to reproduce the results of Keller‘s 1985 IEEE paper in which the Fuzzy K-Nearest Neighbour algorithm was first introduced. To develop the algorithm, the authors of the paper introduced the theory of fuzzy-sets into the well-known K-nearest neighbour decision rule. Their motivation was to address a limitation with the said rule that it gives the training samples equal weight in deciding the class memberships of the patterns to be classified, regardless of the degree to which these samples are representative of their own classes. The authors proposed three methods for assigning initial fuzzy memberships to the samples in the training data set, and presented experimental results and comparisons to the crisp version of the algorithm showing how their proposed one outperforms it in terms of the error rate. They also show that their algorithm compares well against other more sophisticated pattern classification procedures, including the Bayes classifier and the perceptron. Finally, they develop a fuzzy analog to the nearest prototype algorithm.
The authors of the paper used FORTRAN to implement their proposed algorithms, but I will probably use MATLAB to do that and maybe some C as well.
Project 9 : Domain adaptation
By : Nika Haghtalab
Classification methods usually perform well when the testing and training data are drawn form the same distribution. However, in many applications we use a labeled training data from some fixed source, but we aim to use our model on different testing targets. In this project, I will focus on Domain adaptation which addresses the above problem, in different settings. In particular, I will review following papers.
J. Blitzer, R. McDonald, and F. Pereira. Domain adaptation with structural correspondence learning. In Proc. of EMNLP '06, 2006.
S. Ben-David, J. Blitzer, K. Crammer, and F. Pereira. Analysis of Representations for Domain Adaptation. In Proc of NIPS'06, 2006
X. Glorot, A. Bordes, and Y. Bengio. Domain adaptation for large-scale sentiment classication: A deep learning approach. In Proc of ICML'11, 2011
Project 10 : Classification of 3-dimensional objects
By : Kenneth Webster, Soo Min Kang, and Hang Su
Solvability of 3-dimensional physical systems. Can computers determine whether a jumbled rubix cube can be solved?