# Difference between revisions of "Learning Combinatorial Optimzation"

Learning Combinatorial Optimization Algorithms Over Graphs

## Group Members

Abhi (Introduction),

Alvin (actual paper)

Pranav (actual paper),

## 1. Introduction and Problem Motivation

(work in progress) One of the most common problems encountered today is a problem known as The Travelling Salesman Problem. Companies like Ebay, and Fedex are currently spending millions of dollar trying to look for the best solution. The basic premise is that there is a salesman in a city, and he wants to go to people's doorsteps and sell them products, what is the best way to do it? There are a lot of different algorithms devised in the field of Combinatorics and Optimization that can be used to deal with this problem. For example, one solution might be to always visit the next nearest house, and try to sell the product to them, another solution might be to first get a list of possible candidates that may actually purchase your products, and try to visit all of those first, and then go to the original solution. A problem such as this takes a lot of time in order to solve, this problem is an example of a group of problems known as Graph Theory.

(work in progress) A problem which is NP is defined as a problem, where all possible paths can be taken, but the time to solve this problem is some sort of a polynomial function. The current approach to tackling NP-hard combinatorial optimization problems are good heuristics or approximation algorithms. While these approaches have been adequate, it requires specific domain-knowledge behind each individual problem or additional trial-and-error in determining the tradeoff being finding an accurate or efficient heuristics function. However, if these problems are repeated solved, differing only in data values, perhaps we could apply learning on heuristics such that we automate this tedious task.

### a) Graph Theory

Graph Theory is the study of mathematical structures used to model relation between objects. All graphs are made up of a series of vertices (points), edges (lines). These problems have a common notation of: G=(V,E,w)

Where G is the Graph, V are the vertices, E is the set of edges, and w is the set of weights for the edges

The problems which the paper is trying to address are:

Minimum Vertex Cover: Given a ‘graph’ G. If there exists a set of vertices (S) so that every edge touches at least 1 point in S, then we can say that every element in S is a vertex cover. In a minimum vertex cover problem, the goal is to find the minimum possible size of S. A quick example of this is below, you can see that when those 2 red vertices are ticked, every single edge is now touching a red vertex.

Maximum Cut: Given a G, find some vertices and put them in set S. The goal is to maximize the number of edges that touch a vertex in S in one end, and another vertex outside of S in another end. A quick example of this is below, you can see that when those 2 pink vertices are ticked, the number of edges that touch a vertex in S, and another not in S is maximized, and the maximum value for this solution is 8.

Travelling Salesman Problem: Given a G, how should a salesman go about navigating between the edges (roads), in order to maximize his potential sales?

## 2. Example Problems

Testing $X_i$ = 50

## 3. Representation

The choice of representation for the graph, as mentioned above, is known as struct2vec. The intuitive idea of this is very similar to word2vec which is a very popular model for encoding words into a low dimensional space. We begin with explaining $\hat{Q}$ which can be thought of summarizing the state of a graph at a given point in time. In the Reinforcement Learning literature, $\hat{Q}$ is often thought of a measure of quality, in this case, it can be thought of that way too, where the quality of the graph represents how much cost we have avoided.

But representing complex structures is extremely hard, in fact one may always argue that there is some property of the graph that the algorithm has failed to capture, we will elaborate on this in the criticisms of the paper.

Struct2Vec aims to gather information about the graph topology which could represent how to traverse it using the greedy algorithm. This is a claim that the paper makes without any justification, they claim in the struct2vec paper that measuring similarity in the degrees in vertices represents structural relationships between the nodes. However, it is not impossible to think of a mathematical or intuitive counterexample to this problem, especially when it comes to the TSP/maxcut.

$\mu_v^{t + 1} \leftarrow \mathcal{F}(x_v, \{\mu_u\}_{u \in \mathcal{N}(v)}, \{w(v, u)\}_{u \in \mathcal{N}(v)}; \Theta)$

Where:

1. $\mathcal{N}(v) - \text{Neighborhood of v}$

2. $\mathcal{F} - \text{Non Linear Mapping}$

3. $x_v - \text{Current features of the nodes}$

This formula is explicitly given by: $\mu_v^{t + 1} \leftarrow \text{relu}(\theta_1 x_v + \theta_2 \sum_{u \in \mathcal{N}(v)} \mu_u^{t} + \theta_3 \sum_{u \in \mathcal{N}(v)} relu(\theta_4 \cdot w(v, u))$. There are a few interesting facts about this formula, one of them is: the fact that they've used summations, which makes the algorithm order invariant, possibly because they believe the order of the nodes is not really relevant, however, this is fairly contradictory to the baseline they compare against (which is location dependent/order dependent). Also, one might ask the question that, what if the topology allows for updates to be dependent on future updates. This is why it happens over several iterations (the paper presents 4 as a decent number). It does make sense that as we increase the value of $T$, we will see that nodes are dependent on other nodes they are very far away from.

We also highlight the dimensions of the parameters: $\theta_1, \theta_4 \in \mathbb{R}^p, \theta_2, \theta_3 \in \mathbb{R}^{p \times p}$. Now, with this new information about our graphs, we must compute our estimated value function for pursuing a particular action.

$\hat{Q}(h(S), v;\Theta) = \theta_5^{T} relu([\theta_6 \sum_{u \in V} \mu_u^{(T)}, \theta_7 \mu_v^{(T)}])$.

Where, $\theta_5 \in \mathbb{R}^{2p}, \theta_6, \theta_7 \in \mathbb{R}^{p \times p}$.

Finally, $\Theta = \{\theta_i\}_{i=1}^{7}$

## 4. Training

Formulating of Reinforcement learning 1) States - S is a sequence of actions on a graph. 2) Transition - transitioning to another node; Tag the node that was last used with feature x = 1 3) Actions - an action is a node of the graph that isn't part of the sequence of actions. Actions are p-dimensional nodes. 4) Rewards - reward function is defined as change in cost after action and movement.

More specifically, $r(S,v) = c(h(S'),G) - c(h(S),G);$ This represents change in cost evaluated from previous state to new state

For the three optimization problems: MVC, MAXCUT, TSP; we have different formulations of reinforcement learning (states, transitions, .

learning Algorithm:

To perform learning of the parameters, application of n-step Q learning and fitted Q-iteration is used.

Stepped Q-learning: This updates the function's parameters at each step by performing a gradient step to minimize the squared loss of the function. Generalizing to n-step Q learning, it addresses the issue of delayed rewards, where an immediate valuation of rewards may not be optimal. With this instance, 1 step updating of the parameters may not be optimal.

Fitted Q-learning: Is a faster learning convergence when used on top of a neural network. In contrast to updating Q function sample by sample, it updates function with batches of samples from data set instead of singular samples.

## 5. Results and Criticisms

The paper proposes a solution that uses a combination of reinforcement learning and graph embedding to improve current methods of solving graph optimization problems. However, the graph embedding network the authors use is called struct2vec (S2V). S2V takes a graph as input and converts the properties of the nodes in the graph as features. This entails picking a fixed output dimension which may or may not compromise on the expressibility of the node, i.e. we may lose information by arbitrarily choosing an output dimension. In particular, knowing a node’s neighbourhood is useful in problems such as Minimum Vertex Cover or Maximum Cut, however it may not be as useful in problems such as Traveling Salesman Problem.

Another criticism for the paper is the choice of algorithms to compare against. While it is completely up to the authors to choose what they compare their algorithms against, it does seem strange to compare their Reinforcement Learning algorithm to some of the worse insertion heuristics for the TSP. In particular, there are a couple of insertion heuristics that underperform, i.e., choose far below suboptimal tours. It would be very helpful to indicate this to the audience reading the paper. Similarly, for pointer networks being the benchmark.

## 6. Conclusions

TODO: Add the tables from the paper for comparisons The machine learning framework the authors propose is a solution to NP-hard graph optimization problems that have a large amount of instances that need to be computed. Where the problem structure remains largely the same except for specific data values. Such cases are common in the industry where large tech companies have to process millions of requests per second and can afford to invest in expensive pre-computation if it speeds up real-time individual requests. Through their experiments and performance results the paper has shown that their solution could potentially lead to faster development and increased runtime efficiency of algorithms for graph problems.

## 7. Source

Hanjun Dai, Elias B. Khalil, Yuyu Zhang, Bistra Dilkina, Le Song. Learning Combinatorial Optimization Algorithms over Graphs. In Neural Information Processing Systems, 2017