Difference between revisions of "End-to-End Differentiable Adversarial Imitation Learning"

From statwiki
Jump to: navigation, search
(Introduction)
(Continuous Action Distributions)
 
(12 intermediate revisions by 10 users not shown)
Line 2: Line 2:
 
The ability to imitate an expert policy is very beneficial in the case of automating human demonstrated tasks. Assuming that a sequence of state action pairs (trajectories) of an expert policy are available, a new policy can be trained that imitates the expert without having access to the original reward signal used by the expert. There are two main approaches to solve the problem of imitating a policy; they are Behavioural Cloning (BC) and Inverse Reinforcement Learning (IRL). BC directly learns the conditional distribution of actions over states in a supervised fashion by training on single time-step state-action pairs. The disadvantage of BC is that the training requires large amounts of expert data, which is hard to obtain. In addition, an agent trained using BC is unaware of how its action can affect future state distribution. The second method using IRL involves recovering a reward signal under which the expert is uniquely optimal; the main disadvantage is that it’s an ill-posed problem.
 
The ability to imitate an expert policy is very beneficial in the case of automating human demonstrated tasks. Assuming that a sequence of state action pairs (trajectories) of an expert policy are available, a new policy can be trained that imitates the expert without having access to the original reward signal used by the expert. There are two main approaches to solve the problem of imitating a policy; they are Behavioural Cloning (BC) and Inverse Reinforcement Learning (IRL). BC directly learns the conditional distribution of actions over states in a supervised fashion by training on single time-step state-action pairs. The disadvantage of BC is that the training requires large amounts of expert data, which is hard to obtain. In addition, an agent trained using BC is unaware of how its action can affect future state distribution. The second method using IRL involves recovering a reward signal under which the expert is uniquely optimal; the main disadvantage is that it’s an ill-posed problem.
  
To address the problem of imitating an expert policy, techniques based on Generative Adversarial Networks (GANs) have been proposed in recent years. GANs use a discriminator to guide the generative model towards producing patterns like those of the expert. The generator is guided as it tries to produce samples on the correct side of the discriminators decision boundary hyper-plane, as seen in Figure 1. This idea was used by (Ho & Ermon, 2016) in their work titled Generative Adversarial Imitation Learning (GAIL) to imitate an expert policy in a model-free setup. A model free setup is the one where the agent cannot make predictions about what the next state and reward will be before it takes each action since the transition function to move from state A to state B is not learned.  
+
To address the problem of imitating an expert policy, techniques based on Generative Adversarial Networks (GANs) have been proposed in recent years. GANs use a discriminator to guide the generative model towards producing patterns like those of the expert. The generator is guided as it tries to produce samples on the correct side of the discriminators decision boundary hyper-plane, as seen in Figure 1. This idea was used by (Ho & Ermon, 2016)<sup>[[#References|[2]]]</sup> in their work titled Generative Adversarial Imitation Learning (GAIL) to imitate an expert policy in a model-free setup. A model free setup is the one where the agent cannot make predictions about what the next state and reward will be before it takes each action since the transition function to move from state A to state B is not learned.  
  
The  disadvantage  of  the  model-free  approach  comes  to light  when  training  stochastic  policies.   The presence of stochastic elements breaks the flow of information (gradients) from one neural network to the other, thus prohibiting the use of backpropagation. In this situation, a standard solution is to use gradient estimation (Williams, 1992).  This tends to suffer from high variance, resulting in a need for larger sample sizes as well as variance reduction methods. This paper proposes a model-based imitation learning algorithm (MGAIL), in which information propagates from the guiding neural network (D) to the generative  model (G),  which  in  this  case  represents the policy <math>\pi</math> that is to be trained. Training policy <math>\pi</math> assumes the existence of an expert policy <math>\pi_{E}</math> with given trajectories <math>\{s_{0},a_{0},s_{1},...\}^{N}_{i=0}</math> which it aims to imitate without access to the original reward signal <math>r_{e}</math>.  This is achieved by two steps: (1) learning a forward model that approximates the environment’s dynamics (2) building an end-to-end differentiable computation graph that spans over multiple time-steps.  The gradient in such a graph carries information from future states to earlier time-steps, helping the policy to account for compounding errors.
+
The  disadvantage  of  the  model-free  approach  comes  to light  when  training  stochastic  policies. The presence of stochastic elements breaks the flow of information (gradients) from one neural network to the other, thus prohibiting the use of backpropagation. In this situation, a standard solution is to use gradient estimation (Williams, 1992)<sup>[[#References|[8]]]</sup>.  This tends to suffer from high variance, resulting in a need for larger sample sizes as well as variance reduction methods. This paper proposes a model-based imitation learning algorithm (MGAIL), in which information propagates from the guiding neural network (D) to the generative  model (G),  which  in  this  case  represents the policy <math>\pi</math> that is to be trained. Training policy <math>\pi</math> assumes the existence of an expert policy <math>\pi_{E}</math> with given trajectories <math>\{s_{0},a_{0},s_{1},...\}^{N}_{i=0}</math> which it aims to imitate without access to the original reward signal <math>r_{e}</math>.  This is achieved by two steps: (1) learning a forward model that approximates the environment’s dynamics (2) building an end-to-end differentiable computation graph that spans over multiple time-steps.  The gradient in such a graph carries information from future states to earlier time-steps, helping the policy to account for compounding errors.
  
  
Line 17: Line 17:
  
 
== Imitation Learning ==
 
== Imitation Learning ==
A common technique for performing imitation learning is to train a policy <math> \pi </math> that minimizes some loss function <math> l(s, \pi(s)) </math> with respect to a discounted state distribution encountered by the expert: <math> d_\pi(s) = (1-\gamma)\sum_{t=0}^{\infty}\gamma^t p(s_t) </math>. This can be obtained using any supervised learning (SL) algorithm, but the policy's prediction affects future state distributions; this violates the independent and identically distributed (i.i.d) assumption made by most SL algorithms. This process is susceptible to compounding errors since a slight deviation in the learner's behavior can lead to different state distributions not encountered by the expert policy.  
+
A common technique for performing imitation learning is to train a policy <math> \pi </math> that minimizes some loss function <math> l(s, \pi(s)) </math> with respect to a discounted state distribution encountered by the expert: <math> d_\pi(s) = (1-\gamma)\sum_{t=0}^{\infty}\gamma^t p(s_t) </math>. This can be obtained using any supervised learning (SL) algorithm with <math> d_\pi(s) = argmin_{\pi \in \prod}\mathbb{E}_{s \sim d_{\pi}}[l(s,\pi (s))]</math>, but the policy's prediction affects future state distributions; this violates the independent and identically distributed (i.i.d) assumption made by most SL algorithms. This process is susceptible to compounding errors since a slight deviation in the learner's behavior can lead to different state distributions not encountered by the expert policy.  
  
 
This issue was overcome through the use of the Forward Training (FT) algorithm which trains a non-stationary policy iteratively over time. At each time step a new policy is trained on the state distribution induced by the previously trained policies <math>\pi_0</math>, <math>\pi_1</math>, ...<math>\pi_{t-1}</math>. This is continued till the end of the time horizon to obtain a policy that can mimic the expert policy. This requirement to train a policy at each time step till the end makes the FT algorithm impractical for cases where the time horizon is very large or undefined. This shortcoming is resolved using the Stochastic Mixing Iterative Learning (SMILe) algorithm. SMILe trains a stochastic stationary policy over several iterations under the trajectory distribution induced by the previously trained policy: <math> \pi_t = \pi_{t-1} + \alpha (1 - \alpha)^{t-1}(\hat{\pi}_t - \pi_0)</math>, with <math>\pi_0</math> following expert's policy at the start of training.
 
This issue was overcome through the use of the Forward Training (FT) algorithm which trains a non-stationary policy iteratively over time. At each time step a new policy is trained on the state distribution induced by the previously trained policies <math>\pi_0</math>, <math>\pi_1</math>, ...<math>\pi_{t-1}</math>. This is continued till the end of the time horizon to obtain a policy that can mimic the expert policy. This requirement to train a policy at each time step till the end makes the FT algorithm impractical for cases where the time horizon is very large or undefined. This shortcoming is resolved using the Stochastic Mixing Iterative Learning (SMILe) algorithm. SMILe trains a stochastic stationary policy over several iterations under the trajectory distribution induced by the previously trained policy: <math> \pi_t = \pi_{t-1} + \alpha (1 - \alpha)^{t-1}(\hat{\pi}_t - \pi_0)</math>, with <math>\pi_0</math> following expert's policy at the start of training.
Line 53: Line 53:
  
  
REINFORCE gradients suffer from high variance which makes them difficult to work with even after applying variance reduction techniques. In order to better understand the changes required to fool the discriminator we need access to the gradients of the discriminator network, which can be obtained from the Jacobian of the discriminator. This paper demonstrates the use of a forward model along with the Jacobian of the discriminator to train a policy, without using high-variance gradient estimations.
+
REINFORCE gradients suffer from high variance which makes them difficult to work with even after applying variance reduction techniques. While recent general variance reduction techniques like RELAX (Grathwohl et al., 2017)<sup>[[#References|[7]]]</sup> work well, they rely on multiple evaluations of the loss function or learning a surrogate neural network. Unfortunately, this is too computationally difficult for our task. In order to better understand the changes required to fool the discriminator we need access to the gradients of the discriminator network, which can be obtained from the Jacobian of the discriminator. This paper demonstrates the use of a forward model along with the Jacobian of the discriminator to train a policy, without using high-variance gradient estimations.
  
 
= Algorithm =
 
= Algorithm =
Line 59: Line 59:
  
 
== The discriminator network ==
 
== The discriminator network ==
The discriminator network is trained to predict the conditional distribution: <math> D(s,a) = p(y|s,a) </math> where <math> y \in (\pi_E, \pi) </math>.
+
The discriminator network is trained to predict the conditional distribution: <math> D(s,a) = p(y|s,a) </math> where <math> y \in (\pi_E, \pi) </math>. <math>D(s,a)</math> here is  the likelihood ratio with the pair <math>{s,a}</math> generated by <math>\pi</math>.
  
 
The discriminator is trained on an even distribution of expert and generated examples; hence <math> p(\pi) = p(\pi_E) = \frac{1}{2} </math>. Given this and applying Bayes' theorem, we can rearrange and factor <math> D(s,a) </math> to obtain:
 
The discriminator is trained on an even distribution of expert and generated examples; hence <math> p(\pi) = p(\pi_E) = \frac{1}{2} </math>. Given this and applying Bayes' theorem, we can rearrange and factor <math> D(s,a) </math> to obtain:
Line 106: Line 106:
 
\end{align}
 
\end{align}
  
Gumbel-Softmax provides a differentiable approximation of the samples obtained using the Gumbel-Max trick:
+
Gumbel-Softmax provides a differentiable approximation of the samples obtained using the Gumbel-Max trick (Gumbel-softmax allows us to generate a differentiable sample from a discrete distribution, which is needed in this trajectory imitation setting.):
  
 
\begin{align}
 
\begin{align}
Line 139: Line 139:
  
 
== MGAIL Algorithm ==
 
== MGAIL Algorithm ==
Shalev- Shwartz et al. (2016) and Heess et al. (2015) built a multi-step computation graph for describing the familiar policy gradient objective; in this case it is given by:
+
Shalev-Shwartz et al. (2016)<sup>[[#References|[3]]]</sup> and Heess et al. (2015)<sup>[[#References|[4]]]</sup> built a multi-step computation graph for describing the familiar policy gradient objective; in this case it is given by:
  
 
\begin{align}
 
\begin{align}
Line 146: Line 146:
  
  
Using the results from Heess et al. (2015) this paper demonstrates how to differentiate <math> J(\theta) </math> over a trajectory of <math>(s,a,s’) </math> transitions:
+
Using the results from Heess et al. (2015)<sup>[[#References|[4]]]</sup> this paper demonstrates how to differentiate <math> J(\theta) </math> over a trajectory of <math>(s,a,s’) </math> transitions:
  
 
\begin{align}
 
\begin{align}
Line 165: Line 165:
  
 
= Experiments =
 
= Experiments =
The proposed algorithm is evaluated on three discrete control tasks (Cartpole, Mountain-Car, Acrobot), and five continuous control tasks (Hopper, Walker, Half-Cheetah, Ant, and Humanoid), which are modeled by the MuJoCo physics simulator (Todorov et al., 2012) and contain second order dynamics and utilize direct torque control. Expert policies are trained using the Trust Region Policy Optimization (TRPO) algorithm (Schulman et al., 2015). Different number of trajectories are used to train the expert for each task, but all trajectories are of length 1000.
+
The proposed algorithm is evaluated on three discrete control tasks (Cartpole, Mountain-Car, Acrobot) and five continuous control tasks (Hopper, Walker, Half-Cheetah, Ant, and Humanoid). These tasks  are modelled by the MuJoCo physics simulator (Todorov et al., 2012)<sup>[[#References|[9]]]</sup>, contain second order dynamics and utilize direct torque control. Expert policies are trained using the Trust Region Policy Optimization (TRPO) algorithm (Schulman et al., 2015)<sup>[[#References|[5]]]</sup>. Different number of trajectories are used to train the expert for each task, but all trajectories are of length 1000.
The discriminator and generator (policy) networks contains two hidden layers with ReLU non-linearity and are trained using the ADAM optimizer. The total reward received over a period of <math> N </math> steps using BC, GAIL and MGAIL is presented in Table 1. The proposed algorithm achieved the highest reward for most environments while exhibiting performance comparable to the expert over all of them. A comparison between the basic forward model and the more advanced forward model is also made and described in the previous section of this summary. The two models compared are shown below.
+
The discriminator and generator (policy) networks contains two hidden layers with ReLU non-linearities and are trained using the ADAM optimizer. The total reward received over a period of <math> N </math> steps using BC, GAIL and MGAIL is presented in Table 1. The proposed algorithm achieved the highest reward for most environments while exhibiting performance comparable to the expert over all of them. A comparison between the basic forward model and the more advanced forward model is also made and described in the previous section of this summary. The two models compared are shown below.
  
 
[[File:baram17_forward.PNG]]
 
[[File:baram17_forward.PNG]]
Line 174: Line 174:
 
[[File:mgail_test_results.PNG]]
 
[[File:mgail_test_results.PNG]]
  
Table 1. Policy performance, boldface indicates better results, <math> \pm </math> represents one standard deviation.
+
Table 1. Policy performance, <math> \pm </math> represents one standard deviation, a higher (reward) value is better. MGAIL consistently outperforms both GAIL and Behavioural cloning approaches, except on the Cartpole, where MGAIL and GAIL perform equally.
  
 
= Discussion =
 
= Discussion =
This paper presented a model-free algorithm for imitation learning. It demonstrated how a forward model can be used to train policies using the exact gradient of the discriminator network. A downside of this approach is the need to learn a forward model, since this could be difficult in certain domains. Learning the system dynamics directly from raw images is considered as one line of future work. Another future work is to address the violation of the fundamental assumption made by all supervised learning algorithms, which requires the data to be i.i.d. This problem arises because the discriminator and forward models are trained in a supervised learning fashion using data sampled from a dynamic distribution. The authors tried a solution proposed by another paper, which is to reset the learning rate several times during training period, but it did not result in significant improvements.
+
This paper presented a model-free algorithm for imitation learning. It demonstrated how a forward model can be used to train policies using the exact gradient of the discriminator network. A downside of this approach is the need to learn a forward model; this could be difficult in certain domains. Learning the system dynamics directly from raw images is considered as one line of future work. Another future work is to address the violation of the fundamental assumption made by all supervised learning algorithms, which requires the data to be i.i.d. This problem arises because the discriminator and forward models are trained in a supervised learning fashion using data sampled from a dynamic distribution. The authors tried a solution proposed by another paper (Loshchilov & Hutter, 2016)<sup>[[#References|[10]]]</sup>, which is to reset the learning rate several times during training period, but it did not result in significant improvements.
 +
 
 +
= Implementation =
 +
The following repository provides the source code for the paper: https://github.com/itaicaspi/mgail. The repository provides the source code written by the authors, in Tensorflow.
  
 
= Source =
 
= Source =
Line 185: Line 188:
 
# Heess, Nicolas, et al. "Learning continuous control policies by stochastic value gradients." Advances in Neural Information Processing Systems. 2015.
 
# Heess, Nicolas, et al. "Learning continuous control policies by stochastic value gradients." Advances in Neural Information Processing Systems. 2015.
 
# Schulman, John, et al. "Trust region policy optimization." International Conference on Machine Learning. 2015.
 
# Schulman, John, et al. "Trust region policy optimization." International Conference on Machine Learning. 2015.
 +
# Caspi, I. (n.d.). Itaicaspi/mgail. Retrieved March 25, 2018, from https://github.com/itaicaspi/mgail.
 +
# Grathwohl, W., Choi, D., Wu, Y., Roeder, G., & Duvenaud, D. (2017). Backpropagation through the Void: Optimizing control variates for black-box gradient estimation. arXiv preprint arXiv:1711.00123.
 +
# Williams, Ronald J. Simple statistical gradient-following algorithms for connectionist reinforcement learning. Machine learning, 8(3-4):229–256, 1992.
 +
# Todorov, Emanuel, Erez, Tom, and Tassa, Yuval. Mujoco: A physics engine for model-based control. In Intelligent Robots and Systems (IROS), 2012 IEEE/RSJ International Conference on, pp. 5026–5033. IEEE, 2012.
 +
# Loshchilov, Ilya and Hutter, Frank. Sgdr: Stochastic gradient descent with restarts. arXiv preprint arXiv:1608.03983, 2016.

Latest revision as of 22:00, 20 April 2018

Introduction

The ability to imitate an expert policy is very beneficial in the case of automating human demonstrated tasks. Assuming that a sequence of state action pairs (trajectories) of an expert policy are available, a new policy can be trained that imitates the expert without having access to the original reward signal used by the expert. There are two main approaches to solve the problem of imitating a policy; they are Behavioural Cloning (BC) and Inverse Reinforcement Learning (IRL). BC directly learns the conditional distribution of actions over states in a supervised fashion by training on single time-step state-action pairs. The disadvantage of BC is that the training requires large amounts of expert data, which is hard to obtain. In addition, an agent trained using BC is unaware of how its action can affect future state distribution. The second method using IRL involves recovering a reward signal under which the expert is uniquely optimal; the main disadvantage is that it’s an ill-posed problem.

To address the problem of imitating an expert policy, techniques based on Generative Adversarial Networks (GANs) have been proposed in recent years. GANs use a discriminator to guide the generative model towards producing patterns like those of the expert. The generator is guided as it tries to produce samples on the correct side of the discriminators decision boundary hyper-plane, as seen in Figure 1. This idea was used by (Ho & Ermon, 2016)[2] in their work titled Generative Adversarial Imitation Learning (GAIL) to imitate an expert policy in a model-free setup. A model free setup is the one where the agent cannot make predictions about what the next state and reward will be before it takes each action since the transition function to move from state A to state B is not learned.

The disadvantage of the model-free approach comes to light when training stochastic policies. The presence of stochastic elements breaks the flow of information (gradients) from one neural network to the other, thus prohibiting the use of backpropagation. In this situation, a standard solution is to use gradient estimation (Williams, 1992)[8]. This tends to suffer from high variance, resulting in a need for larger sample sizes as well as variance reduction methods. This paper proposes a model-based imitation learning algorithm (MGAIL), in which information propagates from the guiding neural network (D) to the generative model (G), which in this case represents the policy [math]\pi[/math] that is to be trained. Training policy [math]\pi[/math] assumes the existence of an expert policy [math]\pi_{E}[/math] with given trajectories [math]\{s_{0},a_{0},s_{1},...\}^{N}_{i=0}[/math] which it aims to imitate without access to the original reward signal [math]r_{e}[/math]. This is achieved by two steps: (1) learning a forward model that approximates the environment’s dynamics (2) building an end-to-end differentiable computation graph that spans over multiple time-steps. The gradient in such a graph carries information from future states to earlier time-steps, helping the policy to account for compounding errors.


GeneratorFollowingDiscriminator.png

Figure 1: Illustration of GANs. The generative model follows the discriminating hyper-plane defined by the discriminator. Eventually, G will produce patterns similar to the expert patterns.

Background

Markov Decision Process

Consider an infinite-horizon discounted Markov decision process (MDP), defined by the tuple [math](S, A, P, r, \rho_0, \gamma)[/math] where [math]S[/math] is the set of states, [math]A[/math] is a set of actions, [math]P : S × A × S → [0, 1][/math] is the transition probability distribution, [math]r : (S × A) → R[/math] is the reward function, [math]\rho_0 : S → [0, 1][/math] is the distribution over initial states, and [math]γ ∈ (0, 1)[/math] is the discount factor. Let [math]π[/math] denote a stochastic policy [math]π : S × A → [0, 1][/math], [math]R(π)[/math] denote its expected discounted reward: [math]E_πR = E_π [\sum_{t=0}^T \gamma^t r_t][/math] and [math]τ[/math] denote a trajectory of states and actions [math]τ = {s_0, a_0, s_1, a_1, ...}[/math].

Imitation Learning

A common technique for performing imitation learning is to train a policy [math] \pi [/math] that minimizes some loss function [math] l(s, \pi(s)) [/math] with respect to a discounted state distribution encountered by the expert: [math] d_\pi(s) = (1-\gamma)\sum_{t=0}^{\infty}\gamma^t p(s_t) [/math]. This can be obtained using any supervised learning (SL) algorithm with [math] d_\pi(s) = argmin_{\pi \in \prod}\mathbb{E}_{s \sim d_{\pi}}[l(s,\pi (s))][/math], but the policy's prediction affects future state distributions; this violates the independent and identically distributed (i.i.d) assumption made by most SL algorithms. This process is susceptible to compounding errors since a slight deviation in the learner's behavior can lead to different state distributions not encountered by the expert policy.

This issue was overcome through the use of the Forward Training (FT) algorithm which trains a non-stationary policy iteratively over time. At each time step a new policy is trained on the state distribution induced by the previously trained policies [math]\pi_0[/math], [math]\pi_1[/math], ...[math]\pi_{t-1}[/math]. This is continued till the end of the time horizon to obtain a policy that can mimic the expert policy. This requirement to train a policy at each time step till the end makes the FT algorithm impractical for cases where the time horizon is very large or undefined. This shortcoming is resolved using the Stochastic Mixing Iterative Learning (SMILe) algorithm. SMILe trains a stochastic stationary policy over several iterations under the trajectory distribution induced by the previously trained policy: [math] \pi_t = \pi_{t-1} + \alpha (1 - \alpha)^{t-1}(\hat{\pi}_t - \pi_0)[/math], with [math]\pi_0[/math] following expert's policy at the start of training.

Generative Adversarial Networks

GANs learn a generative model that can fool the discriminator by using a two-player zero-sum game:

\begin{align} \underset{G}{\operatorname{argmin}}\; \underset{D\in (0,1)}{\operatorname{argmax}} = \mathbb{E}_{x\sim p_E}[log(D(x)]\ +\ \mathbb{E}_{z\sim p_z}[log(1 - D(G(z)))] \end{align}

In the above equation, [math] p_E [/math] represents the expert distribution and [math] p_z [/math] represents the input noise distribution from which the input to the generator is sampled. The generator produces patterns and the discriminator judges if the pattern was generated or from the expert data. When the discriminator cannot distinguish between the two distributions the game ends and the generator has learned to mimic the expert. GANs rely on basic ideas such as binary classification and algorithms such as backpropagation in order to learn the expert distribution.

GAIL applies GANs to the task of imitating an expert policy in a model-free approach. GAIL uses similar objective functions like GANs, but the expert distribution in GAIL represents the joint distribution over state action tuples:

\begin{align} \underset{\pi}{\operatorname{argmin}}\; \underset{D\in (0,1)}{\operatorname{argmax}} = \mathbb{E}_{\pi}[log(D(s,a)]\ +\ \mathbb{E}_{\pi_E}[log(1 - D(s,a))] - \lambda H(\pi)) \end{align}

where [math] H(\pi) \triangleq \mathbb{E}_{\pi}[-log\: \pi(a|s)][/math] is the entropy.

This problem cannot be solved using the standard methods described for GANs because the generator in GAIL represents a stochastic policy. The exact form of the first term in the above equation is given by: [math] \mathbb{E}_{s\sim \rho_\pi(s)}\mathbb{E}_{a\sim \pi(\cdot |s)} [log(D(s,a)] [/math].

The two-player game now depends on the stochastic properties ([math] \theta [/math]) of the policy, and it is unclear how to differentiate the above equation with respect to [math] \theta [/math]. This problem can be overcome using score functions such as REINFORCE to obtain an unbiased gradient estimation:

\begin{align} \nabla_\theta\mathbb{E}_{\pi} [log\; D(s,a)] \cong \hat{\mathbb{E}}_{\tau_i}[\nabla_\theta\; log\; \pi_\theta(a|s)Q(s,a)] \end{align}

where [math] Q(\hat{s},\hat{a}) [/math] is the score function of the gradient:

\begin{align} Q(\hat{s},\hat{a}) = \hat{\mathbb{E}}_{\tau_i}[log\; D(s,a) | s_0 = \hat{s}, a_0 = \hat{a}] \end{align}


REINFORCE gradients suffer from high variance which makes them difficult to work with even after applying variance reduction techniques. While recent general variance reduction techniques like RELAX (Grathwohl et al., 2017)[7] work well, they rely on multiple evaluations of the loss function or learning a surrogate neural network. Unfortunately, this is too computationally difficult for our task. In order to better understand the changes required to fool the discriminator we need access to the gradients of the discriminator network, which can be obtained from the Jacobian of the discriminator. This paper demonstrates the use of a forward model along with the Jacobian of the discriminator to train a policy, without using high-variance gradient estimations.

Algorithm

This section first analyzes the characteristics of the discriminator network, then describes how a forward model can enable policy imitation through GANs. Lastly, the model based adversarial imitation learning algorithm is presented.

The discriminator network

The discriminator network is trained to predict the conditional distribution: [math] D(s,a) = p(y|s,a) [/math] where [math] y \in (\pi_E, \pi) [/math]. [math]D(s,a)[/math] here is the likelihood ratio with the pair [math]{s,a}[/math] generated by [math]\pi[/math].

The discriminator is trained on an even distribution of expert and generated examples; hence [math] p(\pi) = p(\pi_E) = \frac{1}{2} [/math]. Given this and applying Bayes' theorem, we can rearrange and factor [math] D(s,a) [/math] to obtain:

\begin{aligned} D(s,a) &= p(\pi|s,a) \\ & = \frac{p(s,a|\pi)p(\pi)}{p(s,a|\pi)p(\pi) + p(s,a|\pi_E)p(\pi_E)} \\ & = \frac{p(s,a|\pi)}{p(s,a|\pi) + p(s,a|\pi_E)} \\ & = \frac{1}{1 + \frac{p(s,a|\pi_E)}{p(s,a|\pi)}} \\ & = \frac{1}{1 + \frac{p(a|s,\pi_E)}{p(a|s,\pi)} \cdot \frac{p(s|\pi_E)}{p(s|\pi)}} \\ \end{aligned}

Define [math] \varphi(s,a) [/math] and [math] \psi(s) [/math] to be:

\begin{aligned} \varphi(s,a) = \frac{p(a|s,\pi_E)}{p(a|s,\pi)}, \psi(s) = \frac{p(s|\pi_E)}{p(s|\pi)} \end{aligned}

to get the final expression for [math] D(s,a) [/math]: \begin{aligned} D(s,a) = \frac{1}{1 + \varphi(s,a)\cdot \psi(s)} \end{aligned}

[math] \varphi(s,a) [/math] represents a policy likelihood ratio, and [math] \psi(s) [/math] represents a state distribution likelihood ratio. Based on these expressions, the paper states that the discriminator makes its decisions by answering two questions. The first question relates to state distribution: what is the likelihood of encountering state [math] s [/math] under the distribution induces by [math] \pi_E [/math] vs [math] \pi [/math]? The second question is about behavior: given a state [math] s [/math], how likely is action a under [math] \pi_E [/math] vs [math] \pi [/math]? The desired change in state is given by [math] \psi_s \equiv \partial \psi / \partial s [/math]; this information can by obtained from the partial derivatives of [math] D(s,a) [/math], which is why these derivatives are proposed to be used for training policies (see following sections):

\begin{aligned} \nabla_aD &= - \frac{\varphi_a(s,a)\psi(s)}{(1 + \varphi(s,a)\psi(s))^2} \\ \nabla_sD &= - \frac{\varphi_s(s,a)\psi(s) + \varphi(s,a)\psi_s(s)}{(1 + \varphi(s,a)\psi(s))^2} \\ \end{aligned}

Backpropagating through stochastic units

There is interest in training stochastic policies because stochasticity encourages exploration for Policy Gradient methods. This is a problem for algorithms that build differentiable computation graphs where the gradients flow from one component to another since it is unclear how to backpropagate through stochastic units. The following subsections show how to estimate the gradients of continuous and categorical stochastic elements for continuous and discrete action domains respectively.

Continuous Action Distributions

In the case of continuous action policies, re-parameterization was used to enable computing the derivatives of stochastic models. Assuming that the stochastic policy has a Gaussian distribution [math] \mathcal{N}(\mu_{\theta} (s), \sigma_{\theta}^2 (s))[/math], where the mean and variance are given by some deterministic functions [math]\mu_{\theta}[/math] and [math]\sigma_{\theta}[/math], then the policy [math] \pi [/math] can be written as [math] \pi_\theta(a|s) = \mu_\theta(s) + \xi \sigma_\theta(s) [/math], where [math] \xi \sim N(0,1) [/math]. This way, the authors are able to get a Monte-Carlo estimator of the derivative of the expected value of [math] D(s, a) [/math] with respect to [math] \theta [/math]:

\begin{align} \nabla_\theta\mathbb{E}_{\pi(a|s)}D(s,a) = \mathbb{E}_{\rho (\xi )}\nabla_a D(a,s) \nabla_\theta \pi_\theta(a|s) \cong \frac{1}{M}\sum_{i=1}^{M} \nabla_a D(s,a) \nabla_\theta \pi_\theta(a|s)\Bigr|_{\substack{\xi=\xi_i}} \end{align}

Categorical Action Distributions

In the case of discrete action domains, the paper uses categorical re-parameterization with Gumbel-Softmax. This method relies on the Gumbel-Max trick which is a method for drawing samples from a categorical distribution with class probabilities [math] \pi(a_1|s),\pi(a_2|s),...,\pi(a_N|s) [/math]:

\begin{align} a_{argmax} = \underset{i}{argmax}[g_i + log\ \pi(a_i|s)]\textrm{, where } g_i \sim Gumbel(0, 1). \end{align}

Gumbel-Softmax provides a differentiable approximation of the samples obtained using the Gumbel-Max trick (Gumbel-softmax allows us to generate a differentiable sample from a discrete distribution, which is needed in this trajectory imitation setting.):

\begin{align} a_{softmax} = \frac{exp[\frac{1}{\tau}(g_i + log\ \pi(a_i|s))]}{\sum_{j=1}^{k}exp[\frac{1}{\tau}(g_j + log\ \pi(a_i|s))]} \end{align}


In the above equation, the hyper-parameter [math] \tau [/math] (temperature) trades bias for variance. When [math] \tau [/math] gets closer to zero, the softmax operator acts like argmax resulting in a low bias, but high variance; vice versa when the [math] \tau [/math] is large.

The authors use [math] a_{softmax} [/math] to interact with the environment; argmax is applied over [math] a_{softmax} [/math] to obtain a single “pure” action, but the continuous approximation is used in the backward pass using the estimation: [math] \nabla_\theta\; a_{argmax} \approx \nabla_\theta\; a_{softmax} [/math].

Backpropagating through a Forward model

The above subsections presented the means for extracting the partial derivative [math] \nabla_aD [/math]. The main contribution of this paper is incorporating the use of [math] \nabla_sD [/math]. In a model-free approach the state [math] s [/math] is treated as a fixed input, therefore [math] \nabla_sD [/math] is discarded. This is illustrated in Figure 2. This work uses a model-based approach which makes incorporating [math] \nabla_sD [/math] more involved. In the model-based approach, a state [math] s_t [/math] can be written as a function of the previous state action pair: [math] s_t = f(s_{t-1}, a_{t-1}) [/math], where [math] f [/math] represents the forward model. Using the forward model and the law of total derivatives we get:

\begin{align} \nabla_\theta D(s_t,a_t)\Bigr|_{\substack{s=s_t, a=a_t}} &= \frac{\partial D}{\partial a}\frac{\partial a}{\partial \theta}\Bigr|_{\substack{a=a_t}} + \frac{\partial D}{\partial s}\frac{\partial s}{\partial \theta}\Bigr|_{\substack{s=s_t}} \\ &= \frac{\partial D}{\partial a}\frac{\partial a}{\partial \theta}\Bigr|_{\substack{a=a_t}} + \frac{\partial D}{\partial s}\left (\frac{\partial f}{\partial s}\frac{\partial s}{\partial \theta}\Bigr|_{\substack{s=s_{t-1}}} + \frac{\partial f}{\partial a}\frac{\partial a}{\partial \theta}\Bigr|_{\substack{a=a_{t-1}}} \right ) \end{align}


Using this formula, the error regarding deviations of future states [math] (\psi_s) [/math] propagate back in time and influence the actions of policies in earlier times. This is summarized in Figure 3.

modelFree blockDiagram.PNG

Figure 2: Block-diagram of the model-free approach: given a state [math] s [/math], the policy outputs [math] \mu [/math] which is fed to a stochastic sampling unit. An action [math] a [/math] is sampled, and together with [math] s [/math] are presented to the discriminator network. In the backward phase, the error message [math] \delta_a [/math] is blocked at the stochastic sampling unit. From there, a high-variance gradient estimation is used ([math] \delta_{HV} [/math]). Meanwhile, the error message [math] \delta_s [/math] is flushed.

modelBased blockDiagram.PNG

Figure 3: Block diagram of model-based adversarial imitation learning.

Figure 3 describes the computation graph for training the policy (i.e. G). The discriminator network D is fixed at this stage and is trained separately. At time [math] t [/math] of the forward pass, [math] \pi [/math] outputs a distribution over actions: [math] \mu_t = \pi(s_t) [/math], from which an action at is sampled. For example, in the continuous case, this is done using the re-parametrization trick: [math] a_t = \mu_t + \xi \cdot \sigma [/math], where [math] \xi \sim N(0,1) [/math]. The next state [math] s_{t+1} = f(s_t, a_t) [/math] is computed using the forward model (which is also trained separately), and the entire process repeats for time [math] t+1 [/math]. In the backward pass, the gradient of [math] \pi [/math] is comprised of a.) the error message [math] \delta_a [/math] (Green) that propagates fluently through the differentiable approximation of the sampling process. And b.) the error message [math] \delta_s [/math] (Blue) of future time-steps, that propagate back through the differentiable forward model.

MGAIL Algorithm

Shalev-Shwartz et al. (2016)[3] and Heess et al. (2015)[4] built a multi-step computation graph for describing the familiar policy gradient objective; in this case it is given by:

\begin{align} J(\theta) = \mathbb{E}\left [ \sum_{t=0}^{T} \gamma ^t D(s_t,a_t)|\theta\right ] \end{align}


Using the results from Heess et al. (2015)[4] this paper demonstrates how to differentiate [math] J(\theta) [/math] over a trajectory of [math](s,a,s’) [/math] transitions:

\begin{align} J_s &= \mathbb{E}_{p(a|s)}\mathbb{E}_{p(s'|s,a)}\left [ D_s + D_a \pi_s + \gamma J'_{s'}(f_s + f_a \pi_s) \right] \\ J_\theta &= \mathbb{E}_{p(a|s)}\mathbb{E}_{p(s'|s,a)}\left [ D_a \pi_\theta + \gamma (J'_{s'} f_a \pi_\theta + J'_\theta) \right] \end{align}

The policy gradient [math] \nabla_\theta J [/math] is calculated by applying equations 12 and 13 recursively for [math] T [/math] iterations. The MGAIL algorithm is presented below.

MGAIL alg.PNG

Forward Model Structure

The stability of the learning process depends on the prediction accuracy of the forward model, but learning an accurate forward model is challenging by itself. The authors propose methods for improving the performance of the forward model based on two aspects of its functionality. First, the forward model should learn to use the action as an operator over the state space. To accomplish this, the actions and states, which are sampled form different distributions need to be first represented in a shared space. This is done by encoding the state and action using two separate neural networks and combining their outputs to form a single vector. Additionally, multiple previous states are used to predict the next state by representing the environment as an [math] n^{th} [/math] order MDP. A gated recurrent units (GRU, a simpler variant on the LSTM model) layer is incorporated into the state encoder to enable recurrent connections from previous states. Using these modifications, the model is able to achieve better, and more stable results compared to the standard forward model based on a feed forward neural network. The comparison is presented in Figure 4.

performance comparison.PNG

Figure 4: Performance comparison between a basic forward model (Blue), and the advanced forward model (Green).

Experiments

The proposed algorithm is evaluated on three discrete control tasks (Cartpole, Mountain-Car, Acrobot) and five continuous control tasks (Hopper, Walker, Half-Cheetah, Ant, and Humanoid). These tasks are modelled by the MuJoCo physics simulator (Todorov et al., 2012)[9], contain second order dynamics and utilize direct torque control. Expert policies are trained using the Trust Region Policy Optimization (TRPO) algorithm (Schulman et al., 2015)[5]. Different number of trajectories are used to train the expert for each task, but all trajectories are of length 1000. The discriminator and generator (policy) networks contains two hidden layers with ReLU non-linearities and are trained using the ADAM optimizer. The total reward received over a period of [math] N [/math] steps using BC, GAIL and MGAIL is presented in Table 1. The proposed algorithm achieved the highest reward for most environments while exhibiting performance comparable to the expert over all of them. A comparison between the basic forward model and the more advanced forward model is also made and described in the previous section of this summary. The two models compared are shown below.

baram17 forward.PNG

mgail test results 1.PNG

mgail test results.PNG

Table 1. Policy performance, [math] \pm [/math] represents one standard deviation, a higher (reward) value is better. MGAIL consistently outperforms both GAIL and Behavioural cloning approaches, except on the Cartpole, where MGAIL and GAIL perform equally.

Discussion

This paper presented a model-free algorithm for imitation learning. It demonstrated how a forward model can be used to train policies using the exact gradient of the discriminator network. A downside of this approach is the need to learn a forward model; this could be difficult in certain domains. Learning the system dynamics directly from raw images is considered as one line of future work. Another future work is to address the violation of the fundamental assumption made by all supervised learning algorithms, which requires the data to be i.i.d. This problem arises because the discriminator and forward models are trained in a supervised learning fashion using data sampled from a dynamic distribution. The authors tried a solution proposed by another paper (Loshchilov & Hutter, 2016)[10], which is to reset the learning rate several times during training period, but it did not result in significant improvements.

Implementation

The following repository provides the source code for the paper: https://github.com/itaicaspi/mgail. The repository provides the source code written by the authors, in Tensorflow.

Source

  1. Baram, Nir, et al. "End-to-end differentiable adversarial imitation learning." International Conference on Machine Learning. 2017.
  2. Ho, Jonathan, and Stefano Ermon. "Generative adversarial imitation learning." Advances in Neural Information Processing Systems. 2016.
  3. Shalev-Shwartz, Shai, et al. "Long-term planning by short-term prediction." arXiv preprint arXiv:1602.01580 (2016).
  4. Heess, Nicolas, et al. "Learning continuous control policies by stochastic value gradients." Advances in Neural Information Processing Systems. 2015.
  5. Schulman, John, et al. "Trust region policy optimization." International Conference on Machine Learning. 2015.
  6. Caspi, I. (n.d.). Itaicaspi/mgail. Retrieved March 25, 2018, from https://github.com/itaicaspi/mgail.
  7. Grathwohl, W., Choi, D., Wu, Y., Roeder, G., & Duvenaud, D. (2017). Backpropagation through the Void: Optimizing control variates for black-box gradient estimation. arXiv preprint arXiv:1711.00123.
  8. Williams, Ronald J. Simple statistical gradient-following algorithms for connectionist reinforcement learning. Machine learning, 8(3-4):229–256, 1992.
  9. Todorov, Emanuel, Erez, Tom, and Tassa, Yuval. Mujoco: A physics engine for model-based control. In Intelligent Robots and Systems (IROS), 2012 IEEE/RSJ International Conference on, pp. 5026–5033. IEEE, 2012.
  10. Loshchilov, Ilya and Hutter, Frank. Sgdr: Stochastic gradient descent with restarts. arXiv preprint arXiv:1608.03983, 2016.