stat946f11: Difference between revisions

From statwiki
Jump to navigation Jump to search
Line 36: Line 36:
We will use graphs in this course to represent the relationship between different random variables.  
We will use graphs in this course to represent the relationship between different random variables.  


====Directed graphical models====
====Directed graphical models (Bayesian networks)====


In the case of directed graphs, the direction of the arrow indicates "causation". For example:
In the case of directed graphs, the direction of the arrow indicates "causation". For example:
Line 54: Line 54:


We will consider a 1-1 map between our graph's vertices and a set of random variables. Consider the following example that uses boolean random variables. It is important to note that the variables need not be boolean and can indeed be discrete over a range or even continuous.
We will consider a 1-1 map between our graph's vertices and a set of random variables. Consider the following example that uses boolean random variables. It is important to note that the variables need not be boolean and can indeed be discrete over a range or even continuous.
Speaking about random variables, we can now refer to the relationship between random variables in terms of dependence. Therefore, the direction of the arrow indicates "conditional dependence". For example:
<br />
<math>A \longrightarrow B</math>:  <math>B\,\!</math> "is dependent on" <math>A\,\!</math>.


====Example====
====Example====

Revision as of 02:14, 30 September 2011

Sign up for your presentation

Introduction

Notation

We will begin with short section about the notation used in these notes. \newline Capital letters will be used to denote random variables and lower case letters denote observations for those random variables:

  • [math]\displaystyle{ \{X_1,\ X_2,\ \dots,\ X_n\} }[/math] random variables
  • [math]\displaystyle{ \{x_1,\ x_2,\ \dots,\ x_n\} }[/math] observations of the random variables

The joint probability mass function can be written as:

[math]\displaystyle{ P( X_1 = x_1, X_2 = x_2, \dots, X_n = x_n ) }[/math]

or as shorthand, we can write this as [math]\displaystyle{ p( x_1, x_2, \dots, x_n ) }[/math]. In these notes both types of notation will be used. We can also define a set of random variables [math]\displaystyle{ X_Q }[/math] where [math]\displaystyle{ Q }[/math] represents a set of subscripts.

Example

Let [math]\displaystyle{ A = \{1,4\} }[/math], so [math]\displaystyle{ X_A = \{X_1, X_4\} }[/math]; [math]\displaystyle{ A }[/math] is the set of indices for the r.v. [math]\displaystyle{ X_A }[/math].
Also let [math]\displaystyle{ B = \{2\},\ X_B = \{X_2\} }[/math] so we can write

[math]\displaystyle{ P( X_A | X_B ) = P( X_1 = x_1, X_4 = x_4 | X_2 = x_2 ).\,\! }[/math]

Graphical Models

Graphs can be represented as a pair of vertices and edges: [math]\displaystyle{ G = (V, E). }[/math]

Two branches of graphical representations of distributions are commonly used in graphical models; Bayesian networks and Markov networks. Both families encompass the properties of factorization and independence, but they differ in the factorization of the distribution that they induce.

  • [math]\displaystyle{ V }[/math] is the set of nodes (vertices).
  • [math]\displaystyle{ E }[/math] is the set of edges.

If the edges have a direction associated with them then we consider the graph to be directed as in Figure 1, otherwise the graph is undirected as in Figure 2.

File:directed.png
Fig.1 A directed graph.
File:undirected.png
Fig.2 An undirected graph.

We will use graphs in this course to represent the relationship between different random variables.

Directed graphical models (Bayesian networks)

In the case of directed graphs, the direction of the arrow indicates "causation". For example:
[math]\displaystyle{ A \longrightarrow B }[/math]: [math]\displaystyle{ A\,\! }[/math] "causes" [math]\displaystyle{ B\,\! }[/math].

In this case we must assume that our directed graphs are acyclic. If our causation graph contains a cycle then it would mean that for example:

  • [math]\displaystyle{ A }[/math] causes [math]\displaystyle{ B }[/math]
  • [math]\displaystyle{ B }[/math] causes [math]\displaystyle{ C }[/math]
  • [math]\displaystyle{ C }[/math] causes [math]\displaystyle{ A }[/math], again.

Clearly, this would confuse the order of the events. An example of a graph with a cycle can be seen in Figure 3. Such a graph could not be used to represent causation. The graph in Figure 4 does not have cycle and we can say that the node [math]\displaystyle{ X_1 }[/math] causes, or affects, [math]\displaystyle{ X_2 }[/math] and [math]\displaystyle{ X_3 }[/math] while they in turn cause [math]\displaystyle{ X_4 }[/math].

File:cyclic.png
Fig.3 A cyclic graph.
File:acyclic.png
Fig.4 An acyclic graph.

We will consider a 1-1 map between our graph's vertices and a set of random variables. Consider the following example that uses boolean random variables. It is important to note that the variables need not be boolean and can indeed be discrete over a range or even continuous.

Speaking about random variables, we can now refer to the relationship between random variables in terms of dependence. Therefore, the direction of the arrow indicates "conditional dependence". For example:
[math]\displaystyle{ A \longrightarrow B }[/math]: [math]\displaystyle{ B\,\! }[/math] "is dependent on" [math]\displaystyle{ A\,\! }[/math].

Example

In this example we will consider the possible causes for wet grass.

The wet grass could be caused by rain, or a sprinkler. Rain can be caused by clouds. On the other hand one can not say that clouds cause the use of a sprinkler. However, the causation exists because the presence of clouds does affect whether or not a sprinkler will be used. If there are more clouds there is a smaller probability that one will rely on a sprinkler to water the grass. As we can see from this example the relationship between two variables can also act like a negative correlation. The corresponding graphical model is shown in Figure 5.

File:wetgrass.png
Fig.5 The wet grass example.

This directed graph shows the relation between the 4 random variables. If we have the joint probability [math]\displaystyle{ P(C,R,S,W) }[/math], then we can answer many queries about this system.

This all seems very simple at first but then we must consider the fact that in the discrete case the joint probability function grows exponentially with the number of variables. If we consider the wet grass example once more we can see that we need to define [math]\displaystyle{ 2^4 = 16 }[/math] different probabilities for this simple example. The table bellow that contains all of the probabilities and their corresponding boolean values for each random variable is called an interaction table.

Example:

[math]\displaystyle{ \begin{matrix} P(C,R,S,W):\\ p_1\\ p_2\\ p_3\\ .\\ .\\ .\\ p_{16} \\ \\ \end{matrix} }[/math]



[math]\displaystyle{ \begin{matrix} ~~~ & C & R & S & W \\ & 0 & 0 & 0 & 0 \\ & 0 & 0 & 0 & 1 \\ & 0 & 0 & 1 & 0 \\ & . & . & . & . \\ & . & . & . & . \\ & . & . & . & . \\ & 1 & 1 & 1 & 1 \\ \end{matrix} }[/math]

Now consider an example where there are not 4 such random variables but 400. The interaction table would become too large to manage. In fact, it would require [math]\displaystyle{ 2^{400} }[/math] rows! The purpose of the graph is to help avoid this intractability by considering only the variables that are directly related. In the wet grass example Sprinkler (S) and Rain (R) are not directly related.

To solve the intractability problem we need to consider the way those relationships are represented in the graph. Let us define the following parameters. For each vertex [math]\displaystyle{ i \in V }[/math],

  • [math]\displaystyle{ \pi_i }[/math]: is the set of parents of [math]\displaystyle{ i }[/math]
    • ex. [math]\displaystyle{ \pi_R = C }[/math] \ (the parent of [math]\displaystyle{ R = C }[/math])
  • [math]\displaystyle{ f_i(x_i, x_{\pi_i}) }[/math]: is the joint p.d.f. of [math]\displaystyle{ i }[/math] and [math]\displaystyle{ \pi_i }[/math] for which it is true that:
    • [math]\displaystyle{ f_i }[/math] is nonnegative for all [math]\displaystyle{ i }[/math]
    • [math]\displaystyle{ \displaystyle\sum_{x_i} f_i(x_i, x_{\pi_i}) = 1 }[/math]

Claim: There is a family of probability functions [math]\displaystyle{ P(X_V) = \prod_{i=1}^n f_i(x_i, x_{\pi_i}) }[/math] where this function is nonnegative, and

[math]\displaystyle{ \sum_{x_1}\sum_{x_2}\cdots\sum_{x_n} P(X_V) = 1 }[/math]

To show the power of this claim we can prove the equation (\ref{eqn:WetGrass}) for our wet grass example:

[math]\displaystyle{ \begin{matrix} P(X_V) &=& P(C,R,S,W) \\ &=& f(C) f(R,C) f(S,C) f(W,S,R) \end{matrix} }[/math]

We want to show that

[math]\displaystyle{ \begin{matrix} \sum_C\sum_R\sum_S\sum_W P(C,R,S,W) & = &\\ \sum_C\sum_R\sum_S\sum_W f(C) f(R,C) f(S,C) f(W,S,R) & = & 1. \end{matrix} }[/math]

Consider factors [math]\displaystyle{ f(C) }[/math], [math]\displaystyle{ f(R,C) }[/math], [math]\displaystyle{ f(S,C) }[/math]: they do not depend on [math]\displaystyle{ W }[/math], so we can write this all as

[math]\displaystyle{ \begin{matrix} & & \sum_C\sum_R\sum_S f(C) f(R,C) f(S,C) \cancelto{1}{\sum_W f(W,S,R)} \\ & = & \sum_C\sum_R f(C) f(R,C) \cancelto{1}{\sum_S f(S,C)} \\ & = & \cancelto{1}{\sum_C f(C)} \cancelto{1}{\sum_R f(R,C)} \\ & = & 1 \end{matrix} }[/math]

since we had already set [math]\displaystyle{ \displaystyle \sum_{x_i} f_i(x_i, x_{\pi_i}) = 1 }[/math].

Let us consider another example with a different directed graph.
Example:
Consider the simple directed graph in Figure 6.

Fig.6 Simple 4 node graph.

Assume that we would like to calculate the following: [math]\displaystyle{ p(x_3|x_2) }[/math]. We know that we can write the joint probability as:

[math]\displaystyle{ p(x_1,x_2,x_3,x_4) = f(x_1) f(x_2,x_1) f(x_3,x_2) f(x_4,x_3) \,\! }[/math]

We can also make use of Bayes' Rule here:

[math]\displaystyle{ p(x_3|x_2) = \frac{p(x_2,x_3)}{ p(x_2)} }[/math]
[math]\displaystyle{ \begin{matrix} p(x_2,x_3) & = & \sum_{x_1} \sum_{x_4} p(x_1,x_2,x_3,x_4) ~~~~ \hbox{(marginalization)} \\ & = & \sum_{x_1} \sum_{x_4} f(x_1) f(x_2,x_1) f(x_3,x_2) f(x_4,x_3) \\ & = & \sum_{x_1} f(x_1) f(x_2,x_1) f(x_3,x_2) \cancelto{1}{\sum_{x_4}f(x_4,x_3)} \\ & = & f(x_3,x_2) \sum_{x_1} f(x_1) f(x_2,x_1). \end{matrix} }[/math]

We also need

[math]\displaystyle{ \begin{matrix} p(x_2) & = & \sum_{x_1}\sum_{x_3}\sum_{x_4} f(x_1) f(x_2,x_1) f(x_3,x_2) f(x_4,x_3) \\ & = & \sum_{x_1}\sum_{x_3} f(x_1) f(x_2,x_1) f(x_3,x_2) \\ & = & \sum_{x_1} f(x_1) f(x_2,x_1). \end{matrix} }[/math]

Thus,

[math]\displaystyle{ \begin{matrix} p(x_3|x_2) & = & \frac{ f(x_3,x_2) \sum_{x_1} f(x_1) f(x_2,x_1)}{ \sum_{x_1} f(x_1) f(x_2,x_1)} \\ & = & f(x_3,x_2). \end{matrix} }[/math]

Theorem 1.

[math]\displaystyle{ f_i(x_i,x_{\pi_i}) = p(x_i|x_{\pi_i}).\,\! }[/math]
[math]\displaystyle{ \therefore \ P(X_V) = \prod_{i=1}^n p(x_i|x_{\pi_i})\,\! }[/math]

.

In our simple graph, the joint probability can be written as

[math]\displaystyle{ p(x_1,x_2,x_3,x_4) = p(x_1)p(x_2|x_1) p(x_3|x_2) p(x_4|x_3).\,\! }[/math]

Instead, had we used the chain rule we would have obtained a far more complex equation:

[math]\displaystyle{ p(x_1,x_2,x_3,x_4) = p(x_1) p(x_2|x_1)p(x_3|x_2,x_1) p(x_4|x_3,x_2,x_1).\,\! }[/math]

The Markov Property, or Memoryless Property is when the variable [math]\displaystyle{ X_i }[/math] is only affected by [math]\displaystyle{ X_j }[/math] and so the random variable [math]\displaystyle{ X_i }[/math] given [math]\displaystyle{ X_j }[/math] is independent of every other random variable. In our example the history of [math]\displaystyle{ x_4 }[/math] is completely determined by [math]\displaystyle{ x_3 }[/math].
By simply applying the Markov Property to the chain-rule formula we would also have obtained the same result.

Now let us consider the joint probability of the following six-node example found in Figure 7.

Fig.7 Six node example.

If we use Theorem 1 it can be seen that the joint probability density function for Figure 7 can be written as follows:

[math]\displaystyle{ P(X_1,X_2,X_3,X_4,X_5,X_6) = P(X_1)P(X_2|X_1)P(X_3|X_1)P(X_4|X_2)P(X_5|X_3)P(X_6|X_5,X_2) \,\! }[/math]

Once again, we can apply the Chain Rule and then the Markov Property and arrive at the same result.

[math]\displaystyle{ \begin{matrix} && P(X_1,X_2,X_3,X_4,X_5,X_6) \\ && = P(X_1)P(X_2|X_1)P(X_3|X_2,X_1)P(X_4|X_3,X_2,X_1)P(X_5|X_4,X_3,X_2,X_1)P(X_6|X_5,X_4,X_3,X_2,X_1) \\ && = P(X_1)P(X_2|X_1)P(X_3|X_1)P(X_4|X_2)P(X_5|X_3)P(X_6|X_5,X_2) \end{matrix} }[/math]

Independence

Marginal independence

We can say that [math]\displaystyle{ X_A }[/math] is marginally independent of [math]\displaystyle{ X_B }[/math] if:

[math]\displaystyle{ \begin{matrix} X_A \perp X_B : & & \\ P(X_A,X_B) & = & P(X_A)P(X_B) \\ P(X_A|X_B) & = & P(X_A) \end{matrix} }[/math]

Conditional independence

We can say that [math]\displaystyle{ X_A }[/math] is conditionally independent of [math]\displaystyle{ X_B }[/math] given [math]\displaystyle{ X_C }[/math] if:

[math]\displaystyle{ \begin{matrix} X_A \perp X_B | X_C : & & \\ P(X_A,X_B | X_C) & = & P(X_A|X_C)P(X_B|X_C) \\ P(X_A|X_B,X_C) & = & P(X_A|X_C) \end{matrix} }[/math]

Aside: Before we move on further, we first define the following terms:

  1. I is defined as an ordering for the nodes in graph C.
  2. For each [math]\displaystyle{ i \in V }[/math], [math]\displaystyle{ V_i }[/math] is defined as a set of all nodes that appear earlier than i excluding [math]\displaystyle{ \pi_i }[/math].

Let us consider the example of the six node figure given above (Figure 7). We can define [math]\displaystyle{ I }[/math] as follows:

[math]\displaystyle{ I = \{1,2,3,4,5,6\} \,\! }[/math]

We can then easily compute [math]\displaystyle{ V_i }[/math] for say [math]\displaystyle{ i=3,6 }[/math].

[math]\displaystyle{ V_3 = \{2\}, V_6 = \{1,3,4\}\,\! }[/math]

We would be interested in finding the conditional independence between random variables in this graph. We know [math]\displaystyle{ X_i \perp X_{v_i} | X_{\pi_i} }[/math] for each [math]\displaystyle{ i }[/math]. So:
[math]\displaystyle{ X_1 \perp \phi | \phi }[/math],
[math]\displaystyle{ X_2 \perp \phi | X_1 }[/math],
[math]\displaystyle{ X_3 \perp X_2 | X_1 }[/math],
[math]\displaystyle{ X_4 \perp \{X_1,X_3\} | X_2 }[/math],
[math]\displaystyle{ X_5 \perp \{X_1,X_2,X_4\} | X_3 }[/math],
[math]\displaystyle{ X_6 \perp \{X_1,X_3,X_4\} | \{X_2,X_5\} }[/math]
To illustrate why this is true we can take a simple example. Show that:

[math]\displaystyle{ P(X_4|X_1,X_2,X_3) = P(X_4|X_2)\,\! }[/math]

Proof: first, we know [math]\displaystyle{ P(X_1,X_2,X_3,X_4,X_5,X_6) = P(X_1)P(X_2|X_1)P(X_3|X_1)P(X_4|X_2)P(X_5|X_3)P(X_6|X_5,X_2)\,\! }[/math]

then

[math]\displaystyle{ \begin{matrix} P(X_4|X_1,X_2,X_3) & = & \frac{P(X_1,X_2,X_3,X_4)}{P(X_1,X_2,X_3)}\\ & = & \frac{ \sum_{X_5} \sum_{X_6} P(X_1,X_2,X_3,X_4,X_5,X_6)}{ \sum_{X_4} \sum_{X_5} \sum_{X_6}P(X_1,X_2,X_3,X_4,X_5,X_6)}\\ & = & \frac{P(X_1)P(X_2|X_1)P(X_3|X_1)P(X_4|X_2)}{P(X_1)P(X_2|X_1)P(X_3|X_1)}\\ & = & P(X_4|X_2) \end{matrix} }[/math]

The other conditional independences can be proven through a similar process.

Bayes Ball

The Bayes Ball algorithm can be used to determine if two random variables represented in a graph are independent. The algorithm can show that either two nodes in a graph are independent OR that they are not necessarily independent. The Bayes Ball algorithm can not show that two nodes are dependant. The algorithm will be discussed further in later parts of this section.

Canonical Graphs

In order to understand the Bayes Ball algorithm we need to first introduce 3 canonical graphs.

Markov Chain

In the following graph (Figure 8 X is independent of Z given Y.

We say that: [math]\displaystyle{ X }[/math] [math]\displaystyle{ \perp }[/math] [math]\displaystyle{ Z }[/math] [math]\displaystyle{ | }[/math] [math]\displaystyle{ Y }[/math]

Fig.8 Markov chain.

We can prove this independence:

[math]\displaystyle{ \begin{matrix} P(Z|X,Y) & = & \frac{P(X,Y,Z)}{P(X,Y)}\\ & = & \frac{P(X)P(Y|X)P(Z|Y)}{P(X)P(Y|X)}\\ & = & P(Z|Y) \end{matrix} }[/math]

Where

[math]\displaystyle{ \begin{matrix} P(X,Y) & = & \displaystyle \sum_Z P(X,Y,Z) \\ & = & \displaystyle \sum_Z P(X)P(Y|X)P(Z|Y) \\ & = & P(X)P(Y | X) \displaystyle \sum_Z P(Z|Y) \\ & = & P(X)P(Y | X)\\ \end{matrix} }[/math]

Hidden Cause

In the Hidden Cause case we can say that X is independent of Z given Y. In this case Y is the hidden cause and if it is known then Z and X are considered independent.

We say that: [math]\displaystyle{ X }[/math] [math]\displaystyle{ \perp }[/math] [math]\displaystyle{ Z }[/math] [math]\displaystyle{ | }[/math] [math]\displaystyle{ Y }[/math]

Fig.9 Hidden cause graph.

The proof of the independence:

[math]\displaystyle{ \begin{matrix} P(Z|X,Y) & = & \frac{P(X,Y,Z)}{P(X,Y)}\\ & = & \frac{P(X)P(Y|X)P(Z|Y)}{P(X)P(Y|X)}\\ & = & P(Z|Y) \end{matrix} }[/math]

The Hidden Cause case is best illustrated with an example:

File:plot44.png
Fig.10 Hidden cause example.

In Figure 10 it can be seen that both "Shoe Size" and "Grey Hair" are dependant on the age of a person. The variables of "Shoe size" and "Grey hair" are dependent in some sense, if there is no "Age" in the picture. Without the age information we must conclude that those with a large shoe size also have a greater chance of having gray hair. However, when "Age" is observed, there is no dependence between "Shoe size" and "Grey hair" because we can deduce both based only on the "Age" variable.

Explaining-Away

Finally, we look at the third type of canonical graph: Explaining-Away Graphs. This type of graph arises when a phenomena has multiple explanations. Here, the conditional independence statement is actually a statement of marginal independence: [math]\displaystyle{ X \amalg Z }[/math].

Fig.11 The missing edge between node X and node Z implies that there is a marginal independence between the two: [math]\displaystyle{ X \amalg Z }[/math].

In these types of scenarios, variables X and Z are independent. However, once the third variable Y is observed, X and Z become dependent (Fig. 11).

To clarify these concepts, suppose Bob and Mary are supposed to meet for a noontime lunch. Consider the following events:

[math]\displaystyle{ late =\begin{cases} 1, & \hbox{if Mary is late}, \\ 0, & \hbox{otherwise}. \end{cases} }[/math]
[math]\displaystyle{ aliens =\begin{cases} 1, & \hbox{if aliens kidnapped Mary}, \\ 0, & \hbox{otherwise}. \end{cases} }[/math]
[math]\displaystyle{ watch =\begin{cases} 1, & \hbox{if Bobs watch is incorrect}, \\ 0, & \hbox{otherwise}. \end{cases} }[/math]

If Mary is late, then she could have been kidnapped by aliens. Alternatively, Bob may have forgotten to adjust his watch for daylight savings time, making him early. Clearly, both of these events are independent. Now, consider the following probabilities:

[math]\displaystyle{ \begin{matrix} P( late = 1 ) \\ P( aliens = 1 ~|~ late = 1 ) \\ P( aliens = 1 ~|~ late = 1, watch = 0 ) \end{matrix} }[/math]

We expect [math]\displaystyle{ P( late = 1 ) \lt P( aliens = 1 ~|~ late = 1 ) }[/math] since [math]\displaystyle{ P( aliens = 1 ~|~ late = 1 ) }[/math] does not provide any information regarding Bob's watch. Similarly, we expect [math]\displaystyle{ P( aliens = 1 ~|~ late = 1 ) \lt P( aliens = 1 ~|~ late = 1, watch = 0 ) }[/math]. Since [math]\displaystyle{ P( aliens = 1 ~|~ late = 1 ) \neq P( aliens = 1 ~|~ late = 1, watch = 0 ) }[/math], aliens and watch are not independent given late. To summarize,

  • If we do not observe late, then aliens [math]\displaystyle{ ~\amalg~ watch }[/math] ([math]\displaystyle{ X~\amalg~ Z }[/math])
  • If we do observe late, then aliens [math]\displaystyle{ ~\cancel{\amalg}~ watch ~|~ late }[/math] ([math]\displaystyle{ X ~\cancel{\amalg}~ Z ~|~ Y }[/math])

Bayes Ball Algorithm

Goal: We wish to determine whether a given conditional statement such as [math]\displaystyle{ X_{A} ~\amalg~ X_{B} ~|~ X_{C} }[/math] is true given a directed graph.

The algorithm is as follows:

  1. Shade nodes, [math]\displaystyle{ X_{C} }[/math], that are conditioned on.
  2. The initial position of the ball is [math]\displaystyle{ X_{A} }[/math].
  3. If the ball cannot reach [math]\displaystyle{ X_{B} }[/math], then the nodes [math]\displaystyle{ X_{A} }[/math] and [math]\displaystyle{ X_{B} }[/math] must be conditionally independent.
  4. If the ball can reach [math]\displaystyle{ X_{B} }[/math], then the nodes [math]\displaystyle{ X_{A} }[/math] and [math]\displaystyle{ X_{B} }[/math] are not necessarily independent.

The biggest challenge in the Bayes Ball Algorithm is to determine what happens to a ball going from node X to node Z as it passes through node Y. The ball could continue its route to Z or it could be blocked. It is important to note that the balls are allowed to travel in any direction, independent of the direction of the edges in the graph.

We use the canonical graphs previously studied to determine the route of a ball traveling through a graph. Using these three graphs we establish base rules which can be extended upon for more general graphs.

Markov Chain

Fig.12 (a) When the middle node is shaded, the ball is blocked. (b) When the middle ball is not shaded, the ball passes through Y.

A ball traveling from X to Z or from Z to X will be blocked at node Y if this node is shaded. Alternatively, if Y is unshaded, the ball will pass through.

In (Fig. 12(a)), X and Z are conditionally independent ( [math]\displaystyle{ X ~\amalg~ Z ~|~ Y }[/math] ) while in (Fig.12(b)) X and Z are not necessarily independent.

Hidden Cause

Fig.13 (a) When the middle node is shaded, the ball is blocked. (b) When the middle ball is not shaded, the ball passes through Y.

A ball traveling through Y will be blocked at Y if it is shaded. If Y is unshaded, then the ball passes through.

(Fig. 13(a)) demonstrates that X and Z are conditionally independent when Y is shaded.

Explaining-Away

A ball traveling through Y is blocked when Y is unshaded. If Y is shaded, then the ball passes through. Hence, X and Z are conditionally independent when Y is unshaded.

Fig.14 (a) When the middle node is shaded, the ball passes through Y. (b) When the middle ball is unshaded, the ball is blocked.


Bayes Ball Examples

Example 1

In this first example, we wish to identify the behavior of a ball going from X to Y in two-node graphs.

Fig.15 (a)The ball is blocked at Y. (b)The ball passes through Y. (c)The ball passes through Y. (d) The ball is blocked at Y.

The four graphs in (Fig. 15 show different scenarios. In (a), the ball is blocked at Y. In (b) the ball passes through Y. In both of these cases, we use the rules of the Explaining Away Canonical Graph (refer to Fig. 14.) Finally, for the last two graphs, we used the rules of the Hidden Cause Canonical Graph (Fig. 13). In (c), the ball passes through Y while in (d), the ball is blocked at Y.

Example 2

Suppose your home is equipped with an alarm system. There are two possible causes for the alarm to ring:

  • Your house is being burglarized
  • There is an earthquake

Hence, we define the following events:

[math]\displaystyle{ burglary =\begin{cases} 1, & \hbox{if your house is being burglarized}, \\ 0, & \hbox{if your house is not being burglarized}. \end{cases} }[/math]
[math]\displaystyle{ earthquake =\begin{cases} 1, & \hbox{if there is an earthquake}, \\ 0, & \hbox{if there is no earthquake}. \end{cases} }[/math]
[math]\displaystyle{ alarm =\begin{cases} 1, & \hbox{if your alarm is ringing}, \\ 0, & \hbox{if your alarm is off}. \end{cases} }[/math]
[math]\displaystyle{ report =\begin{cases} 1, & \hbox{if a police report has been written}, \\ 0, & \hbox{if no police report has been written}. \end{cases} }[/math]


The burglary and earthquake events are independent if the alarm does not ring. However, if the alarm does ring, then the burglary and the earthquake events are not necessarily independent. Also, if the alarm rings then it is possible for a police report to be issued.

We can use the Bayes Ball Algorithm to deduce conditional independence properties from the graph. Firstly, consider figure (16(a)) and assume we are trying to determine whether there is conditional independence between the burglary and earthquake events. In figure (\ref{fig:AlarmExample1}(a)), a ball starting at the burglary event is blocked at the alarm node.

Fig.16 If we only consider the events burglary, earthquake, and alarm, we find that a ball traveling from burglary to earthquake would be blocked at the alarm node. However, if we also consider the report node, we can find a path between burglary and earthquake.

Nonetheless, this does not prove that the burglary and earthquake events are independent. Indeed, (Fig. 16(b)) disproves this as we have found an alternate path from burglary to earthquake passing through report. It follows that [math]\displaystyle{ burglary ~\cancel{\amalg}~ earthquake ~|~ report }[/math]

Example 3

Referring to figure (Fig. 17), we wish to determine whether the following conditional probabilities are true:

[math]\displaystyle{ \begin{matrix} X_{1} ~\amalg~ X_{3} ~|~ X_{2} \\ X_{1} ~\amalg~ X_{5} ~|~ \{X_{3},X_{4}\} \end{matrix} }[/math]
Fig.17 Simple Markov Chain graph.

To determine if the conditional probability Eq.\ref{eq:c1} is true, we shade node [math]\displaystyle{ X_{2} }[/math]. This blocks balls traveling from [math]\displaystyle{ X_{1} }[/math] to [math]\displaystyle{ X_{3} }[/math] and proves that Eq.\ref{eq:c1} is valid.

After shading nodes [math]\displaystyle{ X_{3} }[/math] and [math]\displaystyle{ X_{4} }[/math] and applying the Bayes Balls Algorithm}, we find that the ball travelling from [math]\displaystyle{ X_{1} }[/math] to [math]\displaystyle{ X_{5} }[/math] is blocked at [math]\displaystyle{ X_{3} }[/math]. Similarly, a ball going from [math]\displaystyle{ X_{5} }[/math] to [math]\displaystyle{ X_{1} }[/math] is blocked at [math]\displaystyle{ X_{4} }[/math]. This proves that Eq.\ref{eq:c2 also holds.

Example 4

Fig.18 Directed graph.

Consider figure (Fig. 18). Using the Bayes Ball Algorithm we wish to determine if each of the following statements are valid:

[math]\displaystyle{ \begin{matrix} X_{4} ~\amalg~ \{X_{1},X_{3}\} ~|~ X_{2} \\ X_{1} ~\amalg~ X_{6} ~|~ \{X_{2},X_{3}\} \\ X_{2} ~\amalg~ X_{3} ~|~ \{X_{1},X_{6}\} \end{matrix} }[/math]
Fig.19 (a) A ball cannot pass through [math]\displaystyle{ X_{2} }[/math] or [math]\displaystyle{ X_{6} }[/math]. (b) A ball cannot pass through [math]\displaystyle{ X_{2} }[/math] or [math]\displaystyle{ X_{3} }[/math]. (c) A ball can pass from [math]\displaystyle{ X_{2} }[/math] to [math]\displaystyle{ X_{3} }[/math].

To disprove Eq.\ref{eq:c3}, we must find a path from [math]\displaystyle{ X_{4} }[/math] to [math]\displaystyle{ X_{1} }[/math] and [math]\displaystyle{ X_{3} }[/math] when [math]\displaystyle{ X_{2} }[/math] is shaded (Refer to Fig. 19(a)). Since there is no route from [math]\displaystyle{ X_{4} }[/math] to [math]\displaystyle{ X_{1} }[/math] and [math]\displaystyle{ X_{3} }[/math] we conclude that Eq.\ref{eq:c3} is true.

Similarly, we can show that there does not exist a path between [math]\displaystyle{ X_{1} }[/math] and [math]\displaystyle{ X_{6} }[/math] when [math]\displaystyle{ X_{2} }[/math] and [math]\displaystyle{ X_{3} }[/math] are shaded (Refer to Fig.19(b)). Hence, Eq.\ref{eq:c4} is true.

Finally, (Fig. 19(c)) shows that there is a route from [math]\displaystyle{ X_{2} }[/math] to [math]\displaystyle{ X_{3} }[/math] when [math]\displaystyle{ X_{1} }[/math] and [math]\displaystyle{ X_{6} }[/math] are shaded. This proves that the statement \ref{eq:c4} is false.

Theorem 2.
Define [math]\displaystyle{ p(x_{v}) = \prod_{i=1}^{n}{p(x_{i} ~|~ x_{\pi_{i}})} }[/math] to be the factorization as a multiplication of some local probability of a directed graph.
Let [math]\displaystyle{ D_{1} = \{ p(x_{v}) = \prod_{i=1}^{n}{p(x_{i} ~|~ x_{\pi_{i}})}\} }[/math]
Let [math]\displaystyle{ D_{2} = \{ p(x_{v}): }[/math]satisfy all conditional independence statements associated with a graph [math]\displaystyle{ \} }[/math].
Then [math]\displaystyle{ D_{1} = D_{2} }[/math].